For the acceptance project of the home, the first is of course the acceptance of the appearance. The acceptance requirements for the appearance of the bathroom cabinet mainly include the cabinet size, color, gloss and verticality. Of course, these are based on their own design and requirements to see if they meet the standard, and Xiaobian will introduce to you how to accept the appearance.
Accept a small cabinet size
For the size of the acceptance cabinet, it is of course mainly based on the agreed standards between the owner and the construction personnel. The size of the bathroom cabinet is mainly measured by several measures such as length, width and height of the bathroom cabinet using a tape measure and a caliper.
Accept two color errors as little as possible
Acceptance of the color requirements of the bathroom cabinet, mainly to see the depth of the color error and the color error of the splicing, in general, the acceptance of the color of the bathroom cabinet is consistent in color, and there should be no difference from the observation of 500mm.
Acceptance and three eyes to see the gloss is better
Bathroom cabinets are often coated with lacquered surfaces. Therefore, the construction and quality of the paint determines the gloss of the bathroom cabinet. The surface of the cabinet must be smooth and free of particles, roughness, oil, whitening and fogging. Therefore, it is required that the previous steps such as polishing and primer should be in place, otherwise the topcoat cannot be covered. Moreover, the paint on the bottom surface must be completely dry and there must be no back sticking. There should be no defects such as scratches, scratches, stains, pinholes, and spray marks on the surface of the topcoat.
Acceptance four attention to vertical flatness
In addition to the apparent appearance requirements of size, color, gloss, etc., don't forget the vertical flatness of the bathroom cabinet. Regardless of whether it is floor-standing or hanging, pay attention to check the vertical flatness of the bathroom cabinet. The required horizontal error is ±1.5mm, the diagonal error is between ±3mm, the cabinet is stable, and the toiletries placed on it will not shake.
Hyundai Parts,Machinery Spare Parts,Hyundai Aftermarket Parts,Dump Truck Spare Parts
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com