[China Aluminum Industry Network] aluminum factory heat insulation material thermal conductivity in the energy transfer process, the heat from the higher temperature to the lower temperature part of the number, that is, in the temperature gradient dr / dc conditions, unit time passed Heat transferred per unit area. For high-temperature metals, metal products are required to have low thermal conductivity in most cases, which is beneficial to reduce metal heat loss.
Metal surface heat-insulating heat-resistant coatings are energy-saving preferred materials. For high-temperature metal heat-insulating materials, they are the main thermal physical properties, and they are usually used to measure the performance of heat-insulating materials. The thermal conductivity of ZS-1 high-temperature metal thermal insulation coating products is closely related to the resistance to heat dew and slag resistance. ZS-1 high temperature metal thermal insulation material conductivity can also be called low thermal conductivity thermal insulation material.
The high temperature insulation and heat insulation coating is a water-based inorganic coating. It is made of Beijing Zhisheng Weihua special high-temperature solution and uses nano ceramic hollow microspheres, silica-alumina fiber, etc. as the inorganic raw materials. The temperature range is 2000°C, and the thermal conductivity is only 0.03. W/mK, ZS-1 high temperature heat insulation coating can effectively inhibit and shield infrared radiant heat and heat conduction heat, and the heat insulation and insulation inhibition efficiency can reach about 90%, which can inhibit the heat radiation and heat of high temperature metal objects. Conducted loss, the internal heat of the object can be kept 70% without loss, the cold object can effectively keep cold and can inhibit the loss of cooling caused by the environmental radiant heat, can prevent the occurrence of object condensation. Zhisheng Weihua ZS-1 heat-resistant insulation coatings also have noise reduction, fire retardant, wear-resisting pressure, insulation breakdown resistance, acid and alkali resistance, light weight, convenient construction and long service life. (Enterprise feeds)
Apply to erosive wear under low stress and small impact abrasive wear, fine particles with small energy and small incident angle working condition. The maximum overlaying thickness is 6mm.(hp100)
Apply to roller wear under medium impact and medium stress working condition.(hp200)
Apply to high-temperature abrasive wear under small angle and small energy erosive wear working condition, the working condition can be up to 850℃. (hp300)
Apply to strong impact abrasive wear working condition, the flexibility of wear layer is in good condition(hp400)
Wear Resistant Flux Cored Electrode
Wear Resistant Flux Cored Electrode,Stainless Steel Welding Rod,Flux Cored Welding Rod,Wear Resistant Welding Rod
SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com