Choose an bathroom to master the skills

Nobel Cesar Impression Tiles   JOYOU Zhongyu bathroom  

Thick glaze does not represent aseptic

Q: Some distributors of bathroom products often use their imported sanitary enamel for their sanitary ware. The number of glaze layers is thicker than that of domestic products. Therefore, the glaze of sanitary ware is smooth and easy to wash, and the thickness of enamel layer can guarantee sterility. Long-term use can ensure good health.

Expert Tip: In fact, how many layers of glaze is not important, as long as the surface finish of the product can reach the national standard.

High temperature does not mean good quality

Q: Some sanitary wares that look the same on the surface can cost several hundred dollars. Some dealers explained that he sells high-temperature pottery, which is absolutely hot and sterile, and the price is naturally higher. The cheap is low-temperature pottery, and quality is not guaranteed.

Experts suggest that high-temperature pottery and low-temperature pottery are purely commercial speculation and have nothing to do with the quality of sanitary ware. These high and low temperatures are only the firing temperature, and firing temperatures below 1300 degrees Celsius are more conducive to energy saving. Low temperature does not mean that the quality is not good, as long as the finished product meets national standards.

Four steps to buy a bathroom

Q: The sanitary products on the market are dazzling. As consumers, because they do not understand the performance of sanitary products, they are often impulsive when buying, and they still listen to the explanations of sellers. Then, how do you choose the sanitary products that are satisfactory? ?

Expert Tips:

Look: Consumers can choose to carefully observe the reflection of the surface of bathroom products from the side under strong light. There is no or little trachoma and pitting on the surface. Products with a high brightness index use high-quality glazed materials and a very good glazing process. They have good reflectivity to light and thus have good visual effects.

Touch: You can use the hand to gently rub on the surface, it feels very smooth and delicate as well. You can also touch the back and feel that there is a fine feeling of "rustle".

Listen: The surface of the ceramic can be tapped by hand. Generally, a good ceramic material is sounded with a relatively crisp sound.

Ratio: Mainly to examine the water absorption rate, the lower the water absorption, the better. Ceramic products have a certain adsorption and penetration ability for water. If water is sucked into the ceramic, it will have a certain degree of expansion, which will easily cause the glaze on the ceramic surface to crack due to expansion. Especially for toilets, if the water absorption rate is high, dirt and odor in the water can be easily absorbed into the ceramic, and unpleasant odors will be produced over time.

Sanitary building materials knowledge Yu bathroom tile prices ld tiles

FRP Grating

FRP Grating,Frp Panels ,Fiberglass Reinforced Panels ,Fiber Reinforced Plastic Sheet

FRP/GRP Co., Ltd. ,

This entry was posted in on