Floor: 89.9% pass rate of fiber board products

The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China (AQSIQ) recently reported the results of the national supervision and inspection of the quality of five types of home decoration products in 2011, among which the pass rate of fiberboard products was 89.9%.

A total of 199 fiberboard products produced by 199 companies in 15 provinces including Hebei, Liaoning, Jilin, Heilongjiang, Jiangsu, Zhejiang, Anhui, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Sichuan and Shaanxi were selected. There are two types of fiberboards for density fiberboard and flooring substrates.

This spot check is based on the “Limited Release of Formaldehyde in Wood-based Panels and Products for Interior Decoration Materials” GB18580-2001, “Medium Density Fibreboard” GB/T11718-2009, and “Fiberboard for Flooring Substrates” LY/T1611-2003 and has been filed. Based on effective corporate standards and product quality requirements, five items such as water-absorption thickness expansion rate, static bending strength, internal bond strength, surface bond strength, and formaldehyde emission were tested for fiberboard products.

Spot checks found that 20 kinds of products do not meet the requirements of the standard, involving water thickness expansion rate, internal bonding strength, formaldehyde emission, static bending strength, surface bonding strength items.

According to reports, the State Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) has notified the local quality and technical supervision departments of the quality of domestic product quality inspections, and instructed the relevant provincial (autonomous regions and municipalities) quality and technical supervision departments to inspect the unqualified products in this spot check in accordance with relevant laws and regulations. The production enterprises shall, in accordance with law, order post-processing measures such as rectification and corrections within a time limit.

This spot check is based on the “Limited Release of Formaldehyde in Wood-based Panels and Products for Interior Decoration Materials” GB18580-2001, “Medium Density Fibreboard” GB/T11718-2009, and “Fiberboard for Flooring Substrates” LY/T1611-2003 and has been filed. Based on effective corporate standards and product quality requirements, five items such as water-absorption thickness expansion rate, static bending strength, internal bond strength, surface bond strength, and formaldehyde emission were tested for fiberboard products. Spot checks found that 20 kinds of products do not meet the requirements of the standard, involving water thickness expansion rate, internal bonding strength, formaldehyde emission, static bending strength, surface bonding strength items. According to reports, the State Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) has notified the local quality and technical supervision departments of the quality of domestic product quality inspections, and instructed the relevant provincial (autonomous regions and municipalities) quality and technical supervision departments to inspect the unqualified products in this spot check in accordance with relevant laws and regulations. The production enterprises shall, in accordance with law, order post-processing measures such as rectification and corrections within a time limit.

tools cart

Shengtang Metal Products Co., Ltd. , http://www.pneumatic-wheel-china.com

This entry was posted in on