Solution for high moisture content on floor coating surface

The solution with higher surface moisture content is determined based on the degree of base surface water content and the specific product performance. Generally divided into several categories:

Professional base waterproof layer:

This kind of product is generally applied to a base surface with a relatively high moisture content, and a waterproofing effect is achieved by applying a layer of impermeable coating. Suitable for basal surfaces with increasing water content. This anti-infiltration product is mainly used to protect against water seepage caused by the rise of water level after the completion of the resin floor system.

Moisture-proof layer This type of product is formed by connecting with the ground floor to form a moisture-proof layer to prevent groundwater from leaking to the ground. Because this method has long-term protection for the resin floor system, it is widely used.

Moisture-proof primers Many manufacturers have developed specialized moisture-proof primers for high-moisture basal surfaces. This method also has a long-term protection effect on the resin floor system, and has a wide range of application.

Standard Undercoat In some special cases, depending on the degree of moisture in the base, we need to apply a standard primer coating when coating a standard resin floor system. The specific precautions and operating methods need to follow the manufacturer's instructions.

The moisture-permeable system makes up for the moisture resistance that the primer coating and the resin floor coating cannot achieve. At present, many manufacturers have developed a moisture-permeable system. The moisture-permeable system is designed to ensure the water vapor transmission rate of the material, and it is also suitable for a base surface that cannot be equipped with a waterproof layer. In general, we recommend contacting the manufacturer prior to painting and adopting the correct waterproof layer scheme to avoid problems or even failure of the floor system in the future.

Release Date:2011/6/17 11:34:01

Machining Parts

Precision Cnc Machining Parts,Brass Forged Parts,Cnc Lathe Machining Part

Chuang Hong Mei Metal Products Co., Ltd. , http://www.tzcastingmfg.com

This entry was posted in on