How to clean cleaning plastic floor

1. When transporting furniture and equipment, it is necessary to add cushioning pads on the transportation route; it is not allowed to pull directly on the floor.
2, in order to prevent scratching the ground, do not wear shoes with nails walking on the ground, if conditions permit, replace the soft-soled shoes as much as possible.
3. Place cushions between the feet of the furniture and equipment and the floor. The cushion size is slightly larger than the base size.
4, when the plastic floor is clean, should use mild neutral detergent, warm water to wipe, do not use strong acid or alkali cleaning the floor. The use of organic solvents for floor treatment requires careful attention.
5, usually pay attention to avoid hard or sharp appliances, fall on the floor, to avoid damage to the floor.
6. Adhesive chewing gum stains on the floor. You can use plastic bags to wrap water, freeze into ice cubes in the refrigerator, and place the ice cubes on the chewing gum to cool it hard and then scrape it off.
7. In order to reduce the wear of the plastic floor surface, prolong the service life of the floor, and keep the floor clean and beautiful, it needs to be thoroughly cleaned, waxed and maintained on a regular basis. Usually 1-2 months.
8, plastic floor, can not be in direct contact with heat sources, shall not be placed on the floor above 60 °C high temperature items, such as electric kettles. Cigarettes that are discarded at will, if not completely extinguished, will leave burn marks on the floor.
9, plastic floor sprinkled with ink, oil, etc., to be treated in a timely manner, daily cleaning available detergent powder, soapy water, remove stains. When encountering stains that are difficult to remove, do not use scouring wires to polish them. Find professionals to deal with them in a timely manner to remove the contamination.

TCT Saw Blades

TCT Saw Blades,Steel Cutting Blade,TCT Saw Blades for Metal

Diamond Saw Blades Co., Ltd. , http://www.nssawblade.com

This entry was posted in on