In order to help customers who use floor-decorative protective coatings to correctly select the type of floor and effectively control the construction cost, it is recommended that customers should start with the following factors:
First, mechanical performance requirements
The following three main areas:
1. Abrasion Resistance: Which vehicles will walk when the floor is in use;
2. Pressure resistance: how much load the floor will bear during use;
3. Impact resistance: whether the impact will cause the ground surface to peel;
Second, the chemical performance requirements
Mainly consider the following two aspects:
1. Acid and alkali resistance: The type and concentration of corrosive chemicals used.
2. Solvent resistance: Solvent type and contact time when used.
Third, the floor position
According to the position of the floor on the ground floor or on the ground floor, is it necessary to determine whether moisture treatment or special moisture-proof floor is required?
Fourth, the basic situation
1. Base strength: General requirements compressive strength ≥ 20Mpa
2. Flatness: Does it need to be repaired with epoxy mortar?
3. Self-leveling treatment is generally required before ground construction
Fifth, aesthetic requirements
1. Color requirements: Does it require color division?
2. Brightness requirement: Choose matte or light?
3. Flatness requirements: Is there a requirement for the flatness of the floor?
Six, security requirements
If the floor is in an oily environment or on a slope, you need to choose a non-slip floor; if you are at a gas station, special places such as oil depots need to choose anti-static and explosion-proof.
Flooring Purchase Materials Nature Flooring Decorative Coatings
The Generator Set rapidly rises in the volume of the diesel generator set and reaches the ignition point of the diesel. The diesel is ignited, the mixed gas burns violently, and the volume expands rapidly, pushing the piston down, called `work.`
Each cylinder performs work in a certain order, and the thrust acting on the piston passes through the connecting rod to become a force that pushes the crankshaft to rotate, thereby driving the crankshaft to rotate. Using the 'electromagnetic induction' principle, the generator outputs an induced electromotive force that is generated by a closed load loop. Only the most basic working principle of the generator set is described here. A range of diesel and generator control, protection devices and circuits are also required to obtain a usable, stable power output.
The generator set (English name: Generators Set) is a complete set of mechanical equipment that converts other forms of energy into electrical energy. It consists of a power system, a control system, a noise reduction system, a damping system, and an exhaust system. It is composed of a turbine, a steam turbine, a diesel engine or the like. The power mechanical drive drives the energy generated by water flow, air flow, fuel combustion or nuclear fission into mechanical energy that is transmitted to the generator, which is then converted into electrical energy by the generator and output to the electrical equipment. Generators have a wide range of uses in industrial and agricultural production, national defense, technology and daily life. In recent years, with the advancement of technology, as a high-quality choice for household emergency power supply and field travel power, lightweight portable small generator sets have begun to enter the daily life of residents.
Generator Set, Power Generator Set, Agricultural Generator Set Machine, Portable Power Generator Set, Mobile Power Generator Set
Jining Changsong Construction Machinery Co., Ltd. , http://www.jncsmachinery.com