Gabion Cage (SGS CERTIFIED FACTORY)

• Model NO.: XM-GB13
• Application: Gabion Mesh, Gabions, Construction Wire Mesh
• Usage: Protection of Lake, River and Mountain
• Surface Treatment: Galvanizing and PVC Coating
• Aperture: 60X80mm, 80X100mm, 80X120mm, 100X120mm
• Zinc Rate: 10-300G/M2
• Feature: Strong, High Zinc Rate, Durable
• Specification: ISO9001: 2008, CE, SGS
• HS Code: 73141900

• Material: Galvanized Wire and PVC Coated Wire
• Hole Shape: Hexagonal
• Technics: Woven
• Size: 1.5X1X1m, 2X1X1m, 3X1X1m, 3X2X0.17m, 3X2X0.3m
• Hole Size: 60X80mm, 80X100mm, 80X120mm, 100X120mm
• Twist: Nomal and Double Twist
• Trademark: Xingmao
• Origin: Anping, China

Factory of Gabion Mattress/Box Since 1990

 

Producing in short time

 

Quality guarantee for 30 years

Quick shipping

1. Gabion Basket Specification 
 

 

 

 

 


 

2. Anping Xingmao Factory Show


 




3. Application of Gabion box

4. Package and Shipping




5.After-sales service
 

 

Our after-sales service start immediately after signing the contract. 
     

1). Source the lowest freight cost for customers' reference. Provide forwarder 

     information and book vessel for customers.

2). The third-party inspection is acceptable. 

     The products and shipment pictures will be provided if no final inspection. 

3). Manual & instructions for Installation are provided in goods package. 

      24 hours maintenance and repair support.

Hose Clamp or Hose Clip is a device used to attach and seal a hose onto a fitting such as a barb or nipple.  Many types are available, including American hose clamp, German hose clip, British  hose clamp , Screw/band (Worm Gear) clamps, t-bolt clamp, Spring clamps, Wire clamps, Ear Clamp and so on.      
                                               
Hose clamps are typically limited to moderate pressures, such as those found in automotive and home applications. At high pressures, especially with large hose sizes, the clamp would have to be unwieldy to be able to withstand the forces expanding it without allowing the hose to slide off the barb or a leak to form. For these high pressure applications, compression fittings, thick crimp fittings, or other designs are normally used.
Hose clamp Uses and applications

Hose clamps are frequently used for things other than their intended use, and are often used as a more permanent version of duct tape wherever a tightening band around something would be useful. The screw band type in particular is very strong, and is used for non-plumbing purposes far more than the other types. These clamps can be found doing everything from mounting signs to holding together emergency (or otherwise) home repairs.                        

 Hose clamp  Sealing and mechanical strength                                                                                         

One of the fundamental goals of most hose clamps is to ensure a tight seal between the hose and the barb, preventing the working fluid from escaping. To this goal, they are designed to provide even pressure on all sides, with no gaps. An example of this would be wire clamps. An obvious design would seem to be simply having a wire around the hose, one end attached to a nut, and the other end to the screw, and when tightened, pulling the ends of the wire towards each other. However, this will leave a gap where no pressure is applied (underneath the screw), and cause a leak. To combat this, the more complicated and weaker design of having the ends overlap and then be pushed apart from each other is used, as this ensures pressure around the entire circumference of the hose.

To ensure a good seal, the barb, hose nipple, or beaded tube must be smooth and free of nicks, scratches, or contamination. Stuck hoses should never be removed by slitting them, as this can leave a scratch on the fitting which will cause a leak.  

Hose Clamp

Hose Clamp,Stainless Steel Hose Clamps,Hose Clip,Pipe Clamps

SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com