[Skills] The main points of the gate repair

The development of multi-generation gates nowadays has completely adopted the intelligent model, mainly used in some toll gates and parking lots, and is mainly used to control the entry and exit of vehicles. What are the methods and common faults of the gate repairs? Let's take a look at the following introduction.

Barrier machine repair

First of all, friends can make adjustments to the limits when problems occur in the gate breakers. When it is found that the gates of the gate gates are not in the horizontal position, limit adjustments can be made to the positions of the magnets. The correct way is to adjust the magnetic poles. In the incorrect state, the led lights will flash abnormally. The easiest way is to adjust the magnetic pole to ensure that the horizontal and vertical positions are guaranteed.

Secondly, the gates must be adjusted in terms of balance, because the gates mainly rely on precise balance to control the tension of the springs, and ensure that the gates will be turned manually in the case of power failure to further test the springs. Pull state.

Thirdly, the fuses of Daozwaji are also more prone to problems. When it is found that the fuse is blown, it is necessary to replace the fuse with the same specifications to ensure that the power is balanced. For the left and right channels, adjustments should be made. You can try to connect the red and capacitor wires of the motor. The yellow color is adjusted to ensure that the tension of the spring corresponds to the corresponding hole position.

Fourth, the operation of the capacitor is also more prone to problems, when the motor's terminal current power input occurs, the motor will appear squeaky sound, the gate will also appear running powerless situation, no belt handling empty meeting Affect the normal use of Daozha, need to replace the running capacitor in time.

Gate gate construction and maintenance methods

1. The construction barrier has the following four steps:

1, take out the random accessories inside the box;

2. Place the box in the installation position, open the door, and use a screwdriver to draw a line along the waist slot on the base plate and remove the box.

3, draw expansion screw holes;

4. Use a percussion hammer to hit four expansion screw holes with a hole depth of 110mm-120mm, and insert an expansion screw to adjust the horizontality and verticality of the cabinet and tighten the nut.

Second, the main points of maintenance barrier attention:

1. Check if the brake reducer leaks oil. If it leaks, it must be filled with gear oil;

2. See if the lift of the brake rod is stable, if it trembles when running, adjust the elasticity of the assist spring to solve;

3, in non-emergency situations, do not stop when the barrier is running, this will easily lead to damage to the gearbox.

Classification of road breakers

Mechanical barrier gate machine: Through human control of the operation of the blocking body (connected with the movement), the mechanical limit controls the movement of the movement;

Semi-automatic gate breaker: the movement of the movement is controlled by an electromagnet;

Automatic barrier machine: The motor is used to control the movement and stop of the movement.

Summary: The above is the content of the Daozhai machine repair points that Xiaobian introduced for everyone. I hope that we can help you effectively. For more information, please pay attention to this website.

Decoration points vacuum pump repair

Cup Kn95 Mask With Valve

Cup Mask,Cup Face Mask,Cup Kn95 Mask With Valve,Kn95 Approved Cup Face Mask

Ningbo Autrends International Trade Co., Ltd , https://www.autrendsafety.com

This entry was posted in on