High-temperature heat transfer oil pump factory inspection process: After the first heat transfer oil pump assembly to be done a hydraulic airtight pressure test to see if there is a series of circumstances. Experiments after the pressure test there is pressure to use air pressure. Prevent thermal oil pump leakage exists. In ensuring the case of thermal oil pump leaks, mounted high temperature experimental test pump station, often up to 5 hours of high-speed, high temperature operation experiment. After the test to ensure that there is no leakage of heat transfer oil pump case. Spray paint, packing factory shipping. RY thermal oil pump The pump structure is reasonable, excellent performance, reliable use. Suitable for conveying high temperature liquids without solid particles. The degree of corrosion resistance and temperature depend on the material of the main parts that come in contact with the medium. It is an ideal pump for heat exchange equipment. RY-type high-temperature thermal oil pump structure is reasonable, excellent performance, reliable use. The heat transfer oil pump for conveying solid particles without high temperature liquid. The degree of corrosion resistance and service temperature depends on the material of the main part that is in contact with the medium. High-temperature heat transfer oil pump with self-heating cooling structure, changing the traditional water cooling structure, so that the structure is simple, small size, saving operating costs, good performance, reliable use of China's digestion and absorption of foreign oil pump developed on the basis of the second- The basic structure of the single-stage single-suction cantilever foot support structure, high-temperature thermal oil pump inlet for the axial suction outlet vertical center up, and the same motor mounted on the base.