How to buy high-quality RY thermal oil pump

RY thermal oil pump is the precision of industrial heat transfer oil transportation equipment, in order to ensure its efficiency, but also to reduce the occurrence of failure, which involves the quality of the RY heat transfer oil pump, then how can we Buy high-quality RY thermal oil pump it? Now we will introduce some small series in the purchase of RY thermal oil pump need to pay attention to the matter, as follows: How to buy high-quality RY thermal oil pump I. Pump material; The quality of the material used directly affects the quality of its material mainly composed of cast steel. Cast iron parts, that is, the over-current part of the cast steel (including the pump body. Pump cover. Impeller) Because of the special nature of its work environment, medium The temperature is about 250 degrees -350 degrees, so you must use high temperature castings products. Other cast iron parts (including the bearing body. Gland. Coupling. Pump base), in addition to shaft. Bearings and seals. Shaft The material is 40Cr, but also need to adjust the surface hardness dip dip to make it more wear-resistant: bearings for the import of high-speed high-speed bearings; seal for the packing seal II. Impeller balance: impeller balance is the key in the key, it directly affects Heat pump oil pump life. There are two aspects; 1. Impeller should be used to balance the machine parallel positioning; 2. The impeller and the pump flow channel groove positioning, to unblock; 3. Price: As the saying goes " A point of a price of goods "can not be a single judge according to the level of the price of heat-conducting oil pump is good or bad on the market there are individual heat-conducting oil pump price is lower than that of his material certainly not up to standard, but some too high, rest assured that he nor Will be inlaid with Phnom Penh.It is understood that the material and process of heat-conducting oil pump is also a good distinction.In addition, the life of the heat-conducting oil pump also has a huge contact with the quality of heat transfer oil, low-grade heat-conducting oil is likely to trigger Pump blockage, raw embroidery. Therefore, to do a good job of conducting regular inspection of the heat pump is particularly important. Extended reading: Top ten brands of motorcycles Canton Fair Central China Construction Water Exhibition Pump manufacturers ranked ptc exhibition industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat: 2355962924) http: //beng.liuti. cn / (Service Hotline: 400-6030-811)

This entry was posted in on