Figure 4-6 Automatically obtaining the deformation data of the rebound
4) Using the GSM function, the CAD model is automatically modified based on the rebound deformation data.
- The deformation reference body is the springback deformation data automatically acquired in step 3.
- You can set the rebound ratio 0-1 (of course you can also set the ratio >1).
Figure 4-7 automatically modifying the CAD model based on the springback deformation data
V. Conclusion
Due to the limited space, the above is just a brief introduction of ThinkDesign in a part of the automotive mold enterprise. In the mold design, through the application of ThinkDesign software, the ability to freely modify can be accelerated, saving modification time and reducing costs.
Previous page
Micro tubule cluster pipe/tube
With HDPE (high density polyethylene) uPVC as the raw material, ext-ruder is extruded to make plastic molding production, the single hole wall intersect, a kind of cable sheath pipe of close melting boundary.Products are waterproof, moisture-proof, anti-aging, long service life, and good weatherability characteristic, at the same time, since it is a one-time molding integration porous protect casing, so the construction is convenient, increase the number of embedded holes, to improve the construction speed, greatly reduces the engineering unit of materials and construction cost.
The inner wall of this kind of pipe is smooth and can be used for optical cable, which can save working hours, its structure is reasonable, the use value is high, the life is long.It is mainly used for mobile,uni-com, net-com, broadcast and other communication cable sheath.
Application:
It is mainly used for communication cable, telecommunication cable network, length communication line and cable TV broadcast transmission network.It has the advantages of being flexible and flexible, less laying, convenient construction, safe and reliable, and low cost.
Features:
1. Good corrosion resistance, good electrical insulation, at least 50 years.
2. The porous partition is clear, the thread is easy and convenient.
3. The construction is convenient and fast and the construction cost is low.
4. Tight arrangement of holes to improve the utilization ratio of communication holes.
5. Product integration structure, high strength, long service life.
HDPE/UPVC Multi Hole Plastic Pipe
Plastic Pipe With Multiaperture Profile,New Material Pipe,Multiaperture Profile Plastic Pipe
ZHEJIANG BOYA COMTECH CO.,LTD , http://www.zjbytx.com