The use of small current generator and operation precautions First, the use of small current generator and five major features
The small current generator needs the equipment necessary for large current places in electrical debugging. It is used in power plants, substations, electrical equipment factories, scientific research, laboratories, etc. It is a short-term or intermittent work system and it has a small size. , light weight, good performance, ease of use and maintenance.
Small current generator 5 large structural features
1, the small current generator interface has a screen prompts, can achieve human-computer dialogue, easy operation, easy to error.
2, auto-transformer regulation.
3, indicator light, button operation, simple operation.
4, one can split the structure, easy to move.
5. The small current generator operation panel consists of a start button (green), a stop button (red), and a working system. The visual effect is obvious.
5 points to pay attention to the operation of the small current generator
When using a small current generator to replace fuses and fittings, use the same type as the small current generator. The small current generator pays attention to moisture and oil. During the test, please confirm that the device under test has been powered off and disconnected from other live devices. Before starting up, please check if the output knob is in zero position. The fuse of the instrument is connected with the power socket of the instrument. When replacing, the power cord must be unplugged first. Use a small screwdriver to pull out the fuse box from above.
Before using the small current generator, first observe whether the appearance of the instrument is damaged. After the power is turned on, check whether the instrument header is displayed and whether the display is complete. If the small current generator is not used for a long time, check whether the output terminals of the small current generator are rusted or aged. Otherwise, they should be cleaned and used in time. Please refer to the "Using Operation" method when using it.
After each test is completed, clean the connection wires on the terminals of the small current generator, turn off the power, disconnect the power plug, cover the cover, and place it in a dry, dust-free, ventilated, non-corrosive atmosphere.
The 5 points problem to pay attention to when using a small current generator
1, the small current generator must have a good grounding.
2. Turn on the power supply and connect the console output terminal and the generator input terminal. The meter and the instrument are connected. At this time, the riser waits for a rise.
3. Rotate the regulator clockwise and evenly, paying attention to the output current indication on the console until the required large current.
4. During the test, if abnormal phenomena are found, the power supply should be cut off immediately and the cause must be ascertained before testing.
5. After the test is completed, the regulator must be returned to zero. The air switch should be used to cut off the power supply, cut off the power supply, and remove the test wiring in the direction to ensure safety.
The small current generator needs the equipment necessary for large current places in electrical debugging. It is used in power plants, substations, electrical equipment factories, scientific research, laboratories, etc. It is a short-term or intermittent work system and it has a small size. , light weight, good performance, ease of use and maintenance.
Small current generator 5 large structural features
1, the small current generator interface has a screen prompts, can achieve human-computer dialogue, easy operation, easy to error.
2, auto-transformer regulation.
3, indicator light, button operation, simple operation.
4, one can split the structure, easy to move.
5. The small current generator operation panel consists of a start button (green), a stop button (red), and a working system. The visual effect is obvious.
5 points to pay attention to the operation of the small current generator
When using a small current generator to replace fuses and fittings, use the same type as the small current generator. The small current generator pays attention to moisture and oil. During the test, please confirm that the device under test has been powered off and disconnected from other live devices. Before starting up, please check if the output knob is in zero position. The fuse of the instrument is connected with the power socket of the instrument. When replacing, the power cord must be unplugged first. Use a small screwdriver to pull out the fuse box from above.
Before using the small current generator, first observe whether the appearance of the instrument is damaged. After the power is turned on, check whether the instrument header is displayed and whether the display is complete. If the small current generator is not used for a long time, check whether the output terminals of the small current generator are rusted or aged. Otherwise, they should be cleaned and used in time. Please refer to the "Using Operation" method when using it.
After each test is completed, clean the connection wires on the terminals of the small current generator, turn off the power, disconnect the power plug, cover the cover, and place it in a dry, dust-free, ventilated, non-corrosive atmosphere.
The 5 points problem to pay attention to when using a small current generator
1, the small current generator must have a good grounding.
2. Turn on the power supply and connect the console output terminal and the generator input terminal. The meter and the instrument are connected. At this time, the riser waits for a rise.
3. Rotate the regulator clockwise and evenly, paying attention to the output current indication on the console until the required large current.
4. During the test, if abnormal phenomena are found, the power supply should be cut off immediately and the cause must be ascertained before testing.
5. After the test is completed, the regulator must be returned to zero. The air switch should be used to cut off the power supply, cut off the power supply, and remove the test wiring in the direction to ensure safety.
Glass Fiber Tube,Fiberglass Rod ,Glass Fibre Tube,Carbon Fiber Tube
Telescopic pole Co., Ltd. , http://www.sailingpipingmaterials.com