Kitchen and electricity integration is a major trend

When you mention the kitchen, what do you think of? If you still wash vegetables and cook, then it's time to change your mind. The modern kitchen, which keeps pace with the fashion, has a variety of light and perfect electrical equipment, which allows us to have more wonderful and wonderful life experiences in addition to ordinary cooking. In the birthplace of the whole kitchen in Europe, the core of the kitchen is the “embedded” home appliances. Only when they are truly “combined” {TodayHot} together, that is, the integration of kitchen appliances is the true kitchen. It is foreseeable that in the next 10 years, kitchen and electric integration will be the biggest trend in kitchen design and decoration. Let us start the “electricity” life of the kitchen together!

What are the special requirements for embedded appliances?

Kitchen appliances need to be embedded, and there are some special requirements for certain appliances.

The most prominent is the embedded gas stove. Because it is installed in the cabinet, part of the air required for the combustion of the gas stove should pass through the door burner, so it may affect the normal combustion of the gas stove when the door is opened, and even temper Or flameout, causing gas to leak into the room.

The tightness of the modern kitchen space is better. Once the gas leaks into the room, it is not easy to discharge outside, which is easy to cause an accident. The embedded gas stove must be equipped with a flameout protection device. If the wind blows out the fire or the porridge overflows and the fire is extinguished, the flameout protection device will close the gas valve.

Due to the very high temperature of the oven, the cabinets in which the electric oven is installed must be equipped with high-temperature electrical cabinets for electrical appliances to ensure safety.

The difference between the embedded and the freestanding refrigerator is mainly in the heat dissipation mode. The freestanding refrigerator is cooled on both sides and behind the box, but the embedded refrigerator has the cabinet plate on both sides, so the heat dissipation can only be carried out from the back of the box. In the design of the cabinet, it is necessary to consider the heat dissipation belt from the ground to the back of the box and the top plate. When installing, it is necessary to reserve the heat dissipation space above or below, about 10 to 20 cm. The appearance can be made into a decorative ventilation grille, and there should be a proper space behind the refrigerator to avoid direct fitting with the wall surface, at least a cooling space of not less than 5 cm is reserved. The decoration of the door panel, the current craftsmanship can be integrated with the kitchen cabinet.

What to prepare for installing embedded appliances

When installing embedded electrical appliances, pay attention to the water, electricity, gas pipelines and related plugs, sockets, valves and other locations. Generally speaking, the position of the socket and the valve must be arranged on one side of the appliance. If it is located behind, it will definitely be unable to be safely in place due to insufficient depth.

If the embedded home appliance has a unified standard modulus control, it will greatly facilitate the configuration of kitchen appliances. For the user, once the original embedded appliance is damaged, expired, outdated, if there is no standard size embedded appliance, this part of the space can only be discarded. It is expected that after the implementation of the "Residential Kitchen" standard, the standardization of kitchen appliances will be greatly improved. With embedded appliances that meet the standards, it is only necessary to simply replace them. The replacement appliance is as perfect as the original placement space. However, at present, users who plan to purchase a whole kitchen must leave room for future equipment replacement.

Which appliances are suitable for being embedded

Kitchen-embedded appliances mainly refer to gas stoves, refrigerators, ovens, microwave ovens, dishwashers, etc. In the past, it was normal to place ovens, microwave ovens, etc. on the countertops, but it was messy in perception and affected the countertops. The other features are reflected, so the best solution is to "hidden" them and embed them in the whole cabinet.

It is not difficult to enter the cabinet as a "big guy" like a refrigerator. As long as the position is set in advance and the refrigerator door and the cabinet are integrated into one, the refrigerator can be put into the cabinet. Those small household appliances, as long as they consider what kind of home appliances are needed in their living habits, they can be pre-designed, and then they do not have to wait in the kitchen to consider where the home appliances are located.

Global hardware network

Concerned about surprises

Label: Kitchen and electricity integration is a big trend

Previous: Do you really understand the advantages of cork flooring in home improvement? Next: How to choose a bathroom mirror?

Electroplating is the process of plating a thin layer of other metals or alloys on some metal surfaces by electrolysis. It is a process of attaching a metal film to the surface of metal or other materials by electrolysis to prevent metal oxidation ( Such as rust), improve wear resistance, electrical conductivity, light reflectivity, corrosion resistance (Copper Sulfate, etc.) and enhance the appearance of beauty. During electroplating, a plated metal or other insoluble material is used as an anode, and a workpiece to be plated is used as a cathode, and a cation of the plated metal is reduced on the surface of the workpiece to be plated to form a plating layer. In order to eliminate the interference of other cations and make the plating layer uniform and firm, it is necessary to use a solution containing a plating metal cation as a plating solution to keep the concentration of the metal cation of the plating layer unchanged. The purpose of electroplating is to plate a metal coating on the substrate to alter the surface properties or dimensions of the substrate. Electroplating enhances the corrosion resistance of metals (the corrosion-resistant metal is mostly used for plating metals), increases hardness, prevents wear, improves electrical conductivity, smoothness, heat resistance and surface aesthetics.

Electroplating is divided into hanging plating, barrel plating, continuous plating and brush plating, etc., mainly related to the size and batch of the parts to be plated. Hang plating is suitable for general-sized products such as bumpers for automobiles, handlebars for bicycles, etc. Barrel plating is suitable for small parts, fasteners, washers, pins, etc. Continuous plating is suitable for wire and strip production in batches. Brush plating is suitable for partial plating or repair. The electroplating solution is acidic, alkaline and acidic and neutral solution with chrome mixture. Regardless of the plating method, the plating tank and hanging hanger which are in contact with the product to be plated and the plating solution should have a certain degree. Versatility.

Electroplating Materials

Electroplating Materials,Nickel Sulfate,Nickel Sulfate Green Crystal,Cas No.7786-81-4

Jinan huijinchuan trading Co. LTD ,

This entry was posted in on