After the small backhoe loader operates, the oil temperature is high, and all operations must be replaced after the oil temperature drops.
Take off the oil container: minimum 45L capacity, refill volume: 45L.
1. Put the oil container under the oil drain bolt, remove the bolt, and put the oil. To prevent the oil in the tank of the small backhoe loader from suddenly flowing out, loosen the plug and gradually remove the bolt.
2. After the oil is drained, install it on the screw plug and tighten it.
3, the oil container is placed under the small backhoe loader gearbox oil filter.
4. Remove the oil filter plug of the small backhoe loader gearbox and tighten the screw plug after draining the oil.
5, remove the screw plug, cover, and remove the filter.
6, remove the dirt stuck on the filter of the small backhoe loader, and then use diesel or cleaning oil cleaning, such as filter damage, replace.
7. Reinstall the filter.
8. Inject a certain amount of oil through the filler port.
9, when refueling, check the oil level.
Glass Clamp is so common to see in modern glass door system. Only a simple round glass cutout that shows its convenient both for glass supplier and user. To adapt practical application in the development of construction, a variety design of glass clamp emerges, such as straight line edge, bevel line edge, semi-round shape etc. Also different material available, which greatly enrich the style. JIANGYI has specialized in glass door clamp since 2000, our glass clip could pass 24 hours neutral salt spraying test and acid spraying test. Welcome for your consulting.
Specification
1. Material: Brass/ Stainless Steel/ Zinc. Alloy
2. Finish: Mirror / Matt / Antique/ Red copper / Gold / Rose gold
3. Suitable for glass thickness: 8-10mm, 6mm/ 12mm
4. Load weight: 45kgs
5. Must be tempered glass
Glass Clamp
Glass Clamp,Glass Brackets Clamps ,Stainless Steel Glass Clamps,Glass Shelf Clamps
Jiangyi Industrial Co., Ltd , https://www.cnjyhardware.com