In the winter, what kind of heater is used in the bathroom? This is a problem that many netizens are very entangled. After editing, Xiaobian collected the following information for your reference.
Winter bathroom heating equipment purchase
First, the lamp is warm
In fact, it is a high-power incandescent lamp, and the power is generally 275W (220V). However, such a bulb has a high requirement for glass, and the quality requirement must be a hard explosion-proof glass filled with high-purity nitrogen to prevent oxidation of the tungsten wire.
The advantages and disadvantages of lamp warming are very clear:
The advantage is that the heating is rapid, and you can feel the warmth under the light bulb in an instant. The disadvantage is that the light is too strong, some users feel that they are not used to its glare, especially when the baby takes a bath and the eyes are up. Worried about hurting the eyes, and then the place where it shines is warm, and the place where it can't be seen can't feel its warmth.
Occasionally you will hear reports of warming lights bursting. This is due to the use of inferior glass bulbs (uneven thickness, excessive bubbles), or the working pressure of the lamp is greater than the external pressure, or excessive external force. Well-known brands of qualified products use high-quality light bulbs, so don't worry about this problem.
Second, the wind is warm
We often say that "wind heating" generally defaults to PTC heating and heating methods, PTC is divided into several types, different types of heating efficiency and heating rate are not the same. The advantages and disadvantages of wind warming are roughly the opposite of lamp warming. In theory, hot air can fill the entire room without glare, giving people the feeling of being a small air conditioner. The disadvantage is that it is slower and requires 10 minutes of reservation before bathing. However, some big brands have done relatively mature, multi-functional design such as mute, ventilation, drying, heating, etc. can meet daily needs. More comfortable and safer than lamp heating.
Third, carbon fiber
The biggest advantage is that the amount of infrared radiation is large, and the heating speed is fast, which overcomes the glare of the lamp and the slowness of the wind. Moreover, the wavelength of the infrared light is just close to the infrared wavelength of the human body itself, so it is a more healthy and comfortable heating method compared to the lamp warming.
There are roughly three types of "carbon fiber" popular in the market:
1. Carbon cotton tube, carbon fiber staple fiber, fast heating rate (about 3 seconds), relatively high light conversion rate, and life expectancy of 2000-3000 hours;
2, carbon wire spiral tube, carbon fiber filament, woven into a spiral shape, the speed to reach the highest working temperature is slightly slow (about 5 seconds), life expectancy of 8000 hours or more;
3, halogen tube, heat is acceptable, high light conversion rate, need to attach a colored coating on the glass tube wall to block light, life - not within my current knowledge
When choosing carbon fiber, it is important to note that:
A. It is what kind of above, Li Gui and Li Wei are full of, and more consumers need to do more homework before they start, so as not to buy high-priced home is "pseudo-carbon fiber";
B. The safety of the product structure is very important. Does the key part have an anti-overheating device? If the overheating fails, can the material in this part withstand the high temperature test?
This is why many people in the market now say that such products are immature. In fact, as long as you pay attention to the above-mentioned key links, there is no problem. The factories with strong technical strength are already mature and functional. Constantly optimized, I believe that with the continuous innovation of many powerful manufacturers, such products will become more and more popular.
We produce many types of pneumatic fitting and connector for our customer. the serial products have whole set of solution for many critical situations, such as: corrosive area.
our forging pre-treament for Compressor Fitting let us get low cost and high quality product. The Gaugeable Tube Fitting is easy to connect and unload.
It has different material and different construction for different customer:
Gaugeable Tube Fitting, we have stainless steel, brass, aluminium.
compressor fitting, we have brass and copper plating nickel.
Pneumatic Fitting
Pneumatic Fittings,Bulkhead Union,Metric To Fractional Union,Straight Union
Qingdao Xiangchengde machine , https://www.xiangchengda.com