Many urbanites are eager to return to nature in their home life and enjoy a simple and idyllic living environment. 100% of the natural solid wood furniture is used to cater to the psychological needs of people in this area. Whether it is antique Chinese furniture or luxurious European classical furniture, the natural elegance and simplicity of solid wood furniture make people have a special liking. Since the life of solid wood furniture can last for decades, it is very important to maintain it.
Balance humidity and temperature
Wood is porous and breathes. Like human skin, solid wood furniture constantly exchanges moisture with the air in the living room. When the air is dry, the pores on the surface will shrink due to the evaporation of water, and cracking will occur over time. However, when the humidity rises, the wood expands because it absorbs enough moisture. Therefore, proper adjustment of the temperature and humidity in the home is an important part of maintaining solid wood furniture. The temperature is between 18 degrees Celsius and 24 degrees Celsius, and the relative humidity is between 35% and 40%. It is the ideal environment for solid wood furniture. In order to maintain proper humidity, a humidifier can be used as appropriate.
In addition, avoid placing the furniture close to the heat source or air conditioning vents, as drastic changes in temperature can cause damage and premature aging of the furniture.
Avoid exposure to sunlight
Some wood colors will naturally darken over time, making them thicker and more quaint. Some people may mistakenly believe that long-term exposure to sunlight can produce such an effect. In fact, this is a very wrong idea. The sun shines on the surface of the furniture for a long time. Ultraviolet rays and high temperatures will unbalance the internal moisture of the wood, causing fine cracks on the surface of the coating or causing fading and blackening. The correct way to place solid wood furniture is to avoid placing it in the sun, and to separate the direct sunlight with transparent gauze curtains, which does not affect indoor lighting and protects indoor furniture.
Dust removal wax is very important
Solid wood furniture has paint on the surface, so it is very important to maintain and maintain the paint film. Once the paint film is destroyed, it will not only affect the appearance, but also affect the internal structure of the product. Therefore, if the surface of the furniture is stained, do not rub it hard. Avoid using alcohol, gasoline or other chemical solvents to remove the stain. You should gently wipe off the surface dust with a soft cotton cloth every day, every three months to half a year, then wipe the whole furniture with a damp cotton cloth and mild soapy water to remove the stains and old wax, wipe the water and wait until the water Volatile, and then re-branded with special pure wood furniture glazing wax, then gently grind to form a new protective film.
Do not use plastic and rubber
Avoid laying plastic tablecloths and mats on the surface of solid wood furniture for a long time because the chemical composition of the plastic can damage the coating. Some people write on the solid wood table, like to put a plastic pad on the table to prevent the pen tip from hurting the furniture. It is recommended to use a decorative tablecloth or a small felt pad made of natural fabric between the plastic mat and the table, because plastic and rubber. Chemicals in nylon or nylon products can penetrate and soften the coating, creating depressions and fading. The scratches on the furniture affect both the appearance and the service life. Therefore, care should be taken not to use hard objects and metal objects to directly contact the furniture to protect the surface from scratches.
NANSHAN Ceiling Tool Drive Pins are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
We maintain only the highest standards in the materials, production techniques and quality control measures used to manufacture our fasteners, assuring consistent, optimum quality in every fastener.
The Propellant Power-Pins are specially designed for NANSHAN CEILING FASTENING TOOLS.
Applications
- Mechanical & electrical, bridge, fire control equipment and other jobsites
- Wood joist ceiling, wooden floor
- Integrated ceiling
-
Wire tie, cables and pipes fastening
Ceiling Tool Drive Pins
Ceiling Tool Drive Pins,Ceiling Fastener Pin,Roof Fastening Bracket,Ceiling Drive Pin
Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com