1. Before operating the mixing tank, it is essential to clean it with fresh water and then steam it to ensure hygiene. Materials can be added through the fixed material pipe on the tank lid or by pouring them directly into the open lid. It’s important not to overfill the tank to prevent spillage during stirring, which could lead to unsanitary conditions or material loss. 2. Once the materials are added according to the correct proportions, start the motor and stir for approximately 3 to 5 minutes to ensure even mixing. Afterward, open the drain valve to discharge the mixture and prepare for the next batch. 3. After completing the mixing process, drain any remaining material from the tank. Rinse it immediately with warm water, scrub off any residue, and then clean the inner walls thoroughly using alkaline water at a temperature of 40°C to 50°C. Finally, rinse with clean water before the next use to maintain cleanliness and efficiency. 4. Regularly check the equipment and the reducer’s operation. If the lubricating oil level in the reducer is low, replenish it promptly using 40# engine oil every six months. When the machine is not in use, always clean both the inside and outside of the tank with warm water. Avoid using dirty water to prevent corrosion. Keep the tank clean and well-maintained to ensure its longevity and optimal performance. 5. It's also recommended to inspect the electrical components and mechanical parts regularly. Ensure that all connections are secure and that there are no signs of wear or damage. Proper maintenance not only extends the life of the mixing tank but also ensures safe and efficient operation during daily use. |
Heilongjiang Junhe Building Materials Technology Co., Ltd , https://www.junhejiancai.com