The quality of the plugs, sockets and converters of the quality supervision of the city of 2001.2 is not optimistic. This magazine has obtained the sampling results of the Guangdong plug, socket and converter market, which shows that the qualified rate of this product has decreased compared with the previous year. 3.3 percentage points, the pass rate of random inspection was 78%. A total of 94 enterprises in Zhongshan, Shunde and Dongguan were randomly selected.
Among the three products, the pass rate of non-removable plugs and fixed sockets is higher, 80.8% and 89.9% respectively, indicating that the overall quality level of these two models is better; and the pass rate of detachable plugs is 66.7. %, the converter product has the lowest pass rate, only 33.3%. It shows that the process technology of these two products is still not mature enough, and the product has serious quality problems.
This time, 13 large and medium-sized enterprises were selected, and the product qualification rate was 100%. 81 small enterprises were sampled, accounting for 86.2% of the total number of random inspection enterprises. The product qualification rate also found that 4 batches of products did not obtain safety certification, among which 1 batch of products failed. It is worth noting that the pass rate of safety certified products in this spot check is only 81.1%. This indicates that after obtaining safety certification, these enterprises have relaxed quality management, which should attract our attention and take measures to strengthen management.
The main quality problems found in this spot check were the failure of the “, size inspection†and heat-resistance items. In the 95 batches of products that were sampled, there were 25 batches of unqualified items, and the project failed rate. It is 26.3%. The main reason is that the standard “marks of the project are not taken seriously and are not marked according to the standard. The main performance is that the product name, trademark, product model, power supply symbol, etc. are not marked in the product. Dimensional inspection†and heat resistance “There are 17 batches of unqualified items, and the project failure rate is 17.8%. The size inspection†is mainly caused by the long or short plug and the short distance between the bolt and the insulation surface. The position of the pin and socket is incorrect, which may cause poor contact between the pin and the socket, causing heat or fire. Heat resistance “Unqualified is mainly due to the high temperature resistant insulation materials that do not meet the standard requirements. The heat resistance index is unqualified, which may cause the product to be deformed due to excessive use time, and even have a short circuit or risk of electric shock.
For these products related to people's life safety, the Guangdong Provincial Bureau of Quality and Technical Supervision is making every effort to intensify the quality inspection and seriously investigate and deal with unqualified enterprises.
(一民) Taizhou nutrition and health products counterfeit more than a few days ago, Taizhou Quality and Technical Supervision Bureau, according to the unified deployment of the provincial bureau, organized law enforcement personnel, conducted a centralized inspection of the urban nutrition and health products market. This time, a total of 1261 boxes of nutritional health products such as fake and inferior 'Melaborin', 'Kang Fulai', 'American American ginseng', and Baoling ginseng were seized, with a value of more than 60,000 yuan.
Judging from the inspection situation, the market for nutraceuticals is mixed, and the phenomenon of counterfeiting and shoddy is more serious. In addition to the fact that the regular large and medium-sized shopping malls, supermarkets, and pharmacies have fewer counterfeit and shoddy, the other small stores, small supermarkets, and self-employed households have different levels of counterfeit and shoddy. The main problem is the counterfeiting of famous brands. During the inspection, some common foods such as milk powder and oatmeal were crowned with melatonin, and they were placed on the shelves. Some cultivated ginsengs were processed and impersonated American American ginseng. Second, the name of the factory and the site were fake. Most of the nutritional products are well-known manufacturers in Guangzhou and Shenzhen. The third is the approval number of the Ministry of Health. The inspection found some so-called health foods distributed by some distribution units, some of which are counterfeit the Ministry of Health approval number, and there is no Approved document number. The 36 boxes of American ginseng supplements and other commodities seized by law enforcement officers in a supermarket are marked with the 'health food' mark, but there is no approval number from the Ministry of Health.
Accordingly, the administrative law enforcement personnel first implemented the storage of these fake and shoddy health-care products, and imposed serious punishments on the relevant units and administrative counterparts in accordance with relevant state laws and regulations.
(Zhang Jixiang, Han Cheng*) This newspaper recently, Taixing Quality and Technical Supervision Bureau carried out special inspections on the measurement of goods such as quantitative packaging paints in the city, and inspected 765 business units (personal * 162 batches (times) paint, paint, glass glue , universal adhesives and other commodities. Among them, 104 batches of 106 units were sentenced as unqualified and penalized. The batch pass rate is only from the spot check. Some well-known brands have higher qualification rates for quantitative packaging, such as Shanghai ancient elephants. ", China Resources", Wuxi 'Wan Nianqing', etc., the pass rate of inspection is above 95%, while the qualified rate of quantitative packaging of some paint products in Guangzhou, Yixing, Wujin, Hai'an, Jiangsu, etc. is low, such as Wuxi Zhongzhu Paint Industry Co., Ltd. The pass rate of Ruizhu Polyester King produced by the company is almost zero. The inspection found that the paint market mainly has the following problems: 1. There is a greasy between the dealer and the manufacturer, and the factory product is marked with a certain amount (2kg). The contract of goods is lower than the amount marked (1.5kg* or the manufacturer does not mark the net content, but is arbitrarily marked by the seller at the time of sale.
2. Quantitative packaging of goods is not in accordance with the provisions of the net content or the weight of the label, vague, consumers do not know whether it is gross or net weight, the actual gross weight of some goods can not reach its weight.
3. The outer packaging and the inner packaging are inconsistent. For example, Guangdong Shunde Deyang Coating Co., Ltd. produces Fu Kelai high-grade Taixing ç–‹ quantity packaging polyester lacquer packaging marked 5.6kg, while the inner packaging is marked as 4, the actual amount and the marked amount are large difference, unqualified The short quantity in the packaged goods accounts for 90% of the marked amount of 10% or more, and the shortest amount reaches more than 35% of the marked amount.
(é»„å¤‡æˆ˜å¼ å‡¤å†›)
Seamless Aluminium Alloy Tube
1.Features of Seamless Aluminum Tube
•No weld seams,
preferred for pressure vessels
•More uniform anodizing appearance, especially on heavier
wall sections
•No weld seams that could split in forming operation
•Increased structural integrity
2.Specification: Various size as customer's requirements
3.Material:A6063,A6061,A3003 and other series alu
alloy
4.Suface treatment: anodizing ,polishing,turning ,power coating,mill finish etc
5.Design:OEM,ODM,or design by ourselves
6.Equipment: CNC ,extruding machine,cold drawn machine,heating
oven,straigtening machine,cutting machine
|
OD |
OD Tolerance |
ID Tolerance |
Roundness |
straightness |
Circular run-out |
|
φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
|
φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
6. STANDARD PACKING: Wooden case/carton
7.OPTIONAL PACKING: Polyfoam interleave inside, wooden case
Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at
sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus
7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai
Aluminum Alloy Seamless Tube,Aluminum Alloy Seamless Pipe,Aluminum Seamless Tube,Aluminum Seamless Pipe
Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com