How to plan a home outlet

How to plan a home outlet The location and quantity of the power sockets determine the use of convenient household appliances, and the interior decoration plays an important role. The layout of power outlets should be based on the planned locations of indoor household appliances and furniture, and close attention should be paid to the relevant professional cooperation with the building decoration in order to determine the correctness of the outlet location.

Part1: Activity Space Qiao Decoration Living Room Bedroom Outlet Planning The living room and bedroom are the main activity places where people are concentrated. There are many household appliances, and the design should be based on the layout of the building decoration layout. It should ensure that each major wall has a power outlet.

1. Estimated number of outlets When considering sockets in the living room and bedroom, etc., it is necessary to ensure that each main wall has a 5-hole outlet to meet daily needs. The location of the outlet should be determined according to the design of the house. For example, the outlet for the location of the TV background wall may be more appropriate, and other locations may be determined as required.

2, socket spacing arrangement If the wall length exceeds 3.6m should increase the number of sockets. The length of the wall is less than 3.6m, and the socket can be placed in the middle of the wall. Set the wall of the TV outlet outlet (this wall is the place where the electrical appliances are placed). At least two 5-hole outlets should be provided. One of the outlets should be close to the TV outlet outlet and be kept at a distance of more than 0.5m.

3, socket installation specifications because the air conditioning power consumption is more, if and other electrical appliances using a unified outlet, easier Dharma is more dangerous, therefore, must use a single socket, and air conditioner outlet must use the switch socket to ensure safety.

4. Installation position of the socket The air conditioning socket shall be laid out according to the following conditions in the case of known air conditioners: no special requirements for the socket, generally 0.3m from the ground, the split air conditioning socket shall be located at a distance of 1.8 from the hole of the outlet pipe. m, if the window-type air-conditioning should be set at the window 1.4m away from the ground, if the cabinet-type air-conditioning should be set at a distance of 0.3m from the appropriate location, otherwise consider split-type air-conditioning air-conditioning socket to consider.

Part2: Cooking Environment Safe Kitchen Space Outlet Planning The kitchen should be arranged according to the layout of the building, in a variety of locations, height multiple outlets to meet range hoods, disinfection cabinets, microwave ovens, rice cookers, electric water heaters, refrigerators and many more The need for electrical cooker equipment.

1, socket installation points kitchen socket should be splash socket, plus kitchen appliances, microwave ovens, refrigerators, range hoods, etc., therefore, the kitchen outlet should constitute a separate circuit, can not be mixed with other outlets.

2. The installation height of the socket refers to the layout of the kitchen operating table, stove, shelf, and vegetable washing table. The best position is selected to set the range hood socket and electric socket. The hood of the range hood is set at 2.0m from the ground, and the electric socket is at a distance of 1.4m or according to the specific positions of the operating platform and the hanging cabinet. The height of the refrigerator socket is generally set to 0.3m from the ground.

3, socket installation precautions electric socket should be selected with a switch 16A single-phase three-wire socket, such as electric heater with a fixed position should be careful not to set directly above the electric appliances, in order to avoid the personnel arm over the electric appliance operating switch. If the rated current of a certain electric appliance exceeds 15A, its corresponding electric outlet shall be provided with a radial power supply directly from the household distribution box to an independent power supply.

Part3: Waterproof and moisture-proof The socket of the bathroom is planned. The bathroom is a place where there is a lot of moisture. Therefore, it is strictly forbidden to install a power socket near the wet place in the bathroom such as a shower area or a bathtub. The power outlets in other areas should be splash-proof.

1. When there is an outside window in the installation position of the socket, exhaust fan terminal box or socket should be reserved near the outside window. Since the exhaust air channel is generally near the shower area or bath, the junction box or socket should be installed more than 2.25m above the ground. . 0.6m away from the outside of the shower or bath outside reserved electric water heater outlet and body cleaner power outlet. A beauty and shaving power outlet is installed next to the mirror of the washstand and installed 1.5m to 1.6m above the floor.

2, socket installation notes installed in the bathroom socket should be with switches and lights, if installed in a wet location of the socket, it is best to install a waterproof cover on the surface of the socket, to avoid water vapor into the socket, causing a short circuit.

3. Additional outlets may be provided with a whisker socket and an electric toothbrush or socket with an isolation transformer in the vicinity of the wash basin, depending on the grade of the house or upon request of the owner.

Sodium formate, also known as sodium formate, is CHNaO2 and has a molecular weight of 68.0072.
Sodium formate is a colorless cubic crystal or white granular powder, soluble in water and glycerol, slightly soluble in ethanol, toxic.
Strong decomposition of hydrogen and sodium oxalate. Used in leather industry.
Mainly used in the production of formic acid, oxalic acid and insurance powder.
Used as reagents, disinfectants and mordant for the determination of phosphorus arsenic. preservative. Have a diuretic effect.
As intermediates in production of formic acid and oxalic acid , also for the production of dimethylformamide and so on.  used in medicine, printing and dyeing industry. Or heavy metal precipitation agent.
For alkyd paints, plasticizers, potent explosives, acid resistant materials, aviation lubricants, adhesive additives.

Sodium Formate

Sodium Formate,98% Sodium Formate,Pure White Sodium Formate,Textile Sodium Formate

Hebei Bossory Import & Export Trade Co., Ltd. ,

This entry was posted in on