Our factory produces X6132 milling machine screw (Fig. 1). The processing keyway width is 8_(+0.085)~(+0.085)mm and the length is 1260mm. It was originally clamped with 4 centering vise, the effect is not good. Now the milling clamp with four pairs of jaws is clamped synchronously (Fig. 2 works better. Rotating the T-bolt 14 forces the screw shaft 21 to move to the left because it cannot move axially, and the screw shaft 21 is restricted by the nut 2 Rotate, the screw shaft 21 is fixed
Hydraulic Coupling,Flexible Spring Coupling,Spring Coupling
Anti-Tear Conveyor Belt Co., Ltd. , http://www.nsbelts.com