What is acrylic glue? What are the characteristics of acrylic glue?

Since its launch, Acrylic Glue has been well received by consumers for its strong bonding ability and wide adaptability. Its environmentally friendly and low-toxic properties are also loved by many people. So what is acrylic glue, the use of acrylic glue and attention What are the matters, I believe many people have a question in mind, then the next home of the decoration home network to introduce to you what is the use of acrylic glue and acrylic glue, I hope this article can bring you some Help and reference, let's take a look at it!


亚克力胶水


Acrylic glue, also known as plexiglass glue, PMMA glue, sub-frame glue, acrylic glue, is widely used in the bonding of various organic materials. It is an indispensable material for many acrylic products, so the characteristics of acrylic glue are What? Let's take a look at it below.


Features of Acrylic Glue:


Wide range of applications, with excellent bonding results;


Very strong adhesion;


High temperature resistance, low temperature and high humidity;


Fast curing speed and improved work efficiency;


Not issued for a long time, unchanged white;


Heat resistance, no whitening, and good flexibility;


Suitable for automatic mechanical dispensing, convenient and fast.


Acrylic glue usage:


Docking

Place two butt plates on the platform, leaving a gap below 0.3mm width. Slowly symmetrical injection, until it is completely solidified.


2. Bonding of the facade

The bonded surface needs to be wiped clean to improve the bonding efficiency. If the thickness is within 3 mm, it can be injected with a syringe. If the thickness is more than 3mm, some fine metal wire can be padded to complete the bonding work.


3. Bevel bonding

The bevel should be at a 90 degree angle to prevent displacement.


Uniform slow bonding should be achieved when bonding.


The master can be removed after it has completely solidified.


亚克力胶水


4. Flat bonding

First wipe the sticky surface clean and ask for horizontal placement, and apply a proper amount of acrylic glue. Slowly put it down and slowly push the bubbles out.


Acrylic glue notes:


1. Please use stickers to protect the product.


2. Grease, air bubbles or dust should be cleaned before bonding.


3. If the amount is too small, it will bring in air.


4. No blowing is allowed. If the air blows, the glue will quickly evaporate and turn white.


5. Before fully curing, avoid direct sunlight to avoid yellowing of the product and affect the appearance.


The above is the decoration of the home network Xiaobian for everyone to bring what is the acrylic glue and acrylic glue use methods and precautions related questions, I hope this answer can bring some help to everyone, I do not know if you introduce the small series Satisfied? If you still need more information, please continue to pay attention to our home encyclopedia!


Pyrite as Fillers Used in Grinding Wheels/ Abrasive Tools

Ablation grinding wheel / abrasive( filling agent )

PYRITE__As fillers used in grinding wheels/ abrasive tools

 

Place of Origin: Henan Luoyang, China

Pyrite, Iron pyrites , pyrites lump, Ferro sulphur, Pyrites powder.

Product Description

Detailed introduction: s filling agent for ablating grinding wheel abrasive, which can effectively reduce the grinding wheel temperature during ablation, improve the heat resistance, and prolong the service life of the grinding wheel.

Formation of a protective layer 
(1)The reaction absorbing oxygen occurs between 400 and 475 degrees, thereby reducing the oxidation of resin, reducing the oxidation burn of workpieces, and prolonging the working life of grinding wheels at high temperature.

4 FeS2 + 11 O2→2 Fe2O3 + 8 SO2 
(2) 4 FeS + 7 O2→4 Fe2O3 + 4 SO2 

400-475 degrees is a limit that the grinding wheel can easily reach. The above reaction creates an oxygen-free and hypoxic environment for the grinding wheel at the micro level, thereby improving the high-temperature performance of the grinding wheel.
Decomposition reaction occurs at 650-degree heat absorption, thereby reducing the working temperature of the grinding wheels.

FeS2→FeS + S 
(3) It enters the melting state at about 1100 degrees, which becomes a good lubricant to protect the grinding wheel FeS(s)→FeS(l).

(4)Sulfur, sulfur dioxide and sulfur trioxide react with the workpiece surface to form FexSy:

Quality:

S: 48%min, FE: 42%min, SIO2: 3.0%max, PB: 0.1%max,

ZN: 0.1%max, AS: 0.1%max, . C: 0.3%max, CU: 0.2%max,

H20: 1.0%max, SIZE: 95%min

Granularity: (0-3)mm/(3-8)mm/(3-15)mm/(15-50)mm or other particle size.

Packing: 25KG/500KG/1000KG/BAG or 1000KG/BAG or other packaging.

Note: if there are special requirements, the product can be customized according to clients` requirements.


(In addition, our company is specialized in the production of `Hengkai Metallurgical" Brand - ferro sulphur series for foundry, copper removal agent series for lead smelting, debismuthizing agent for lead smelting, iron sulphide series for resin grinding wheel abrasive industry, iron sulphide series for brake pad friction industry, iron sulphide series for heavy metal wastewater treatment, iron disulphide series for soil improvement, iron disulphide for lithium battery anode, alloy sand series for wear-resisting flooring industry, ferrous sulphide powder series for ferrous sulphide cored wire, ferrous sulphide for ferrous sulphide cored wire, iron sulphide for resin grinding wheel, ferrous sulphide powder for heavy metal wastewater treatment, ferrous sulphide powder for soil improvement, ferrous sulphide cored wire, pyrite, ferrous sulphide ore, molybdenum oxide, high purity molybdenum trioxide, ammonium molybdate, titanium dioxide, cryolite powder, mullite, etc.) 



Pyrite As Fillers Used In Grinding Wheels/ Abrasive Tools--HKYJ-LHT-SL

Abrasive Tools Pyrite

LUANCHUAN COUNTY HENGKAI METALLURGICAL MATERIALS SALES CO.,LTD , https://www.pyritechina.com

This entry was posted in on