Sometimes we will use some transparent waterproof rubber on the exterior wall. What is the transparent waterproof rubber on the outer wall ? Let's introduce it to you. What are the advantages of our transparent transparent waterproof rubber? Including, and how to use the correct method of this exterior wall transparent waterproof glue, as well as the precautions of transparent waterproof rubber on the outer wall, I hope that all the introduction can help everyone.
First, the advantages of transparent waterproof rubber on the outer wall
1. The coating is colorless, transparent, and will not damage the original wall decoration effect after coating, and will not appear yellow, dust, or ash.
2, heat, UV, ozone, acid and alkali, weather resistance, wide range; add special modifiers, surfactants.
3. The coating film has good film forming property, strong bonding force and toughness can resist the stress generated when the base layer is deformed and cracked.
4. With water as the dispersion medium, it is non-combustible, non-toxic, tasteless, and does not pollute the environment. It is an environmentally friendly product.
5, cold construction, safe operation, convenient construction, can be directly sprayed, painted, brushed, scraped on the wall.
6, the film has microporous permeability, suitable for thermal evaporation in the humid climate of the South, and does not agitate.
7, the amount is small, the cost is cheap.
Second, the use of transparent plastic waterproof wall
1. Anti-corrosion, waterproof and anti-seepage coating of inorganic materials such as waterproofing, wall tiles, marble, granite and cement-based materials on the exterior wall of various buildings.
2. Anti-corrosion and waterproof coating of inorganic materials such as cement, ceramics and glass.
3, the bottom layer, new and old roof wall, new and old basement, bathroom, bath, parking platform, parking platform, swimming pool, civil air defense engineering anti-seepage moisture, special-shaped structure, complex parts and other decorative waterproof (proof) anti-corrosion.
Third, the use of transparent plastic waterproof wall
1. External wall porcelain tile waterproof: the base surface is thoroughly cleaned, dried, oil-free and dust-free, and the cracks are repaired to eliminate the honeycomb surface. It is sprayed by hand or sprayed with high-pressure mist, so as to saturate the full coverage.
2. Cement-based concrete: The swimming pool and foundation surface should be dense and firm and dry. At uneven bumps and cracks, it is necessary to scrape the waterproof putty. Generally, it can be brushed 2-3 times. When painting, pay attention to the previous coating. Dry and dry, do not stick the hand and then apply it again, and the brushing direction should be crisscrossed. Before the interval between the layers, the coating film is dry and non-stick, and the maximum coating interval should not exceed 36 hours. The joint of the material can be directly coated. In case of rainy and humid environment, it is not suitable for construction.
3. After the construction of the waterproof layer is completed, all parts of the whole project should be carefully inspected, especially the gaps of the external wall tiles should be carefully checked. The coating should not have the phenomenon of leakage brushing, delamination, warping, cracks, etc. Identify the problem and find out the cause and fix it in time.
Fourth, the external wall transparent waterproof adhesive notes
1. It can't be used under 5 degrees or in a humid and non-ventilated environment, otherwise it will affect the film formation effect.
2. Before construction, the base surface must be dry and free of accumulated water.
3. If it rains during construction, stop construction and protect the construction area.
What is the transparent waterproof rubber on the outer wall, and the advantages of the transparent waterproof rubber on the outer wall and the scope of use. We have all understood the use of this transparent transparent waterproof rubber and the transparent waterproof rubber on the outer wall. Attention, everyone is also in control, our decoration home network has some decorative information, everyone likes to pay attention.
T shape rubber stripe is available in the following materials: Viton rubber, Silicone Rubber, Fluor silicone rubber, Neoprene rubber EPDM and HBNR. Feature: Mold adaptable, strong processing stability; Good fluidity, good heat endurance;
Smooth, flat surface; Low shrinkage rate; Good heat and weather resistance
T Rubber Strip,T Rubber Strips,T Shape Rubber Strip,Black T Shape Rubber Strip
Shenyang Guide Rubber Products Co.,Ltd , https://www.guiderubber.com