As everyone knows, every owner regards the waterproofing project as the focus of renovation. The main reason for this is that if the waterproofing works are not done well, it will not only result in the seepage of water in the walls, but it will also cause incalculable losses to the family. For example, the floor is damp, the clothes are moldy, and so on. Therefore, waterproof must be impeccable. However, it is also a common phenomenon that bricks are not secure after waterproofing the walls . Let's take a look at its solution and how to tiling it on the wall!
1. How to do when the wall is waterproof and the tiling is not secure ?
1. Find out the reason
When you encounter a situation where the wall is waterproof and the bricks are not securely attached, you must not be disarrayed at first. Finding out the cause is your most important job. In fact, the main reason is: When tiling, the back of the tile will be coated with cement mortar, and the moisture will infiltrate the wall will be solidified, but with the waterproof layer after the wall surface will become very smooth, resulting in water can not enter, It's also not easy to dry, so it's not easy to fix when we tiling.
2. Solution
a. The waterproof coating must be applied in strict proportion to the brushing, or after the waterproofing is done, then the cement is “pulled†on the wall and then tiled. b. If you are using a cement mortar, do not apply too thick, and There is a gap between the tiles and the tiles. If tile adhesives are used, there is no need to consider these details.
3. Precautions
In fact, many people like to stick tiles on the wall. Its main purpose is to be more personalized and beautiful. However, after all, the floor tiles are used on the ground. If they are forcibly attached to the wall, they will fall off due to oversize and heavy weight.
2. How does the waterproof tile on the wall?
1. Grassroots inspection and treatment
Shear wall: It is a reinforced concrete cast-in-place wall. This type of wall needs surface chiseling. Because the surface has a release agent, it is very easy to cause wall and plastering and leveling layer from the drum problem; masonry plastering wall: first look at the surface of the wall plaster layer is empty, if it is necessary to repair Light partition wall: According to the firmness of the wall, it is recommended to do the netting process, not only to ensure the strength, but also to prevent cracking.
2. Lapping and paving methods
After the wall is wetted, the wetted wall surface is then treated with cement with 108 glue. Paving method: tiled with cement mortar as a binder. Compared with the thin paste method, the traditional method of laying down reduces the leveling process of the wall surface. Once the wall is pulled, it can start to tile.
3. Water conservation
In order to combine the cement mortar with the walls and bricks, it is necessary to ensure that the bricks are finished for about three days in general, and the water will be cured twice in the morning and evening. In fact, the water is sprayed on the wall tiles.
The article concludes: The above has given everyone a glimpse of how to do after the brick wall is waterproof and how to do it, as well as the knowledge of how to tiling a brick wall. I hope that I can give you some help. In fact, in order to guarantee nothing, the owners are better to find a skilled master to tile the tiles, because everyone can worry!
Stevia Mint Candy, all natural and sugar free, natural flavor
Stevia Mint Candy
Stevia Mint Candy,Fresh Mints Candies,Fruit Flavor Mint,Fresh Mints Candies
JINING USP INTERNATIONAL CO.,LTD. , https://www.uspintl.com