As the name suggests, partitioning is a design that transforms a space into two spaces. There are many ways to cut off it. Nowadays, there are many solid wood hollow partitions. The hollow partitions bring a mystery to people, and they also improve. The grade of the entire space. So now many homes are designed with hollow partitions. The following small series for everyone to introduce how to install the solid wood hollow partition .
First, what are the materials for the solid wood partition?
1. Nowadays, there are many materials that can be used to cut openwork. For example, Aluminum alloy, wood, Steel, and the like. The styles of different materials are also different. The wood is natural and simple, environmentally safe, and Chinese-style families like wooden carved partitions. As the price of wood raw materials continues to rise, and the hollow carving requires a good material for solid wood, the price of this material is also relatively expensive. There are many fancy styles of steel bars, and there are many styles suitable for them. Chinese, European, etc. can be selected to the appropriate partition. The price of reinforced openwork carved partitions is relatively relatively high.
2, hollowed out the carved partition to bear the role and screen similar, are to make the family living area have a more obvious distinction. However, the hollowed-out carved partitions will not block the sunlight and block the circulation of air, and at the same time improve the decoration grade. Therefore, many families like to choose this way to cut off when they are decorating. There are many problems to be aware of when choosing a hollow cut partition. For example, the material, fancy, style, etc. of the hollowed out carving. If the partition material is not good, it will affect the service life; if the fancy and style are not matched with the whole Home Decoration, it will affect the overall effect.
Second, how to operate the installation of solid wood hollow partition
(1) According to the design drawings, release the partition position line and the door opening edge line on the completed wall, floor and ground.
(2) According to the design drawings and the actual size, the keel is cut with a grinding wheel cutter and sorted and stacked. According to the cut off position line and the door edge line, the keel along the ground is fixed on the floor with nails or expansion bolts, and the distance between the nails and the expansion bolts is 600mm.
(3) Insert the keel along the top keel into the reserved hole of the wall for 100mm, then fill it with cement mortar, or fix the end keel with the nail to the wall with the nail and expansion bolt.
(4) According to the partition position line and the door hole edge line, the board is arranged according to the size of the sectional specification, and is drawn on the ground and along the top keel. The insufficient modulus should be arranged in the first board position where the partition is in contact with the wall. A good length of vertical keel is inserted into the groove along the ground and along the top keel, and the flange is oriented toward the panel to be installed.
(5) After adjusting the vertical and positioning accurately, fix it with rivets. The vertical keel by the wall is fixed to the wall with nails or expansion bolts, and the distance between the nails and the expansion bolts is 1 m. Install the keel of the door and window opening: first install the vertical reinforcement keel on both sides of the hole, then install the hole to strengthen the keel up and down, and then install the large hole to strengthen the keel and the struts.
(6) Install the through-cross keel and support card. The vertical keel is braced so that the entire partition keel has sufficient strength and rigidity to install the gypsum board.
skills:
1. The hollow partition should be selected for use in a large area;
2. The material of the hollow partition is better for wood products;
3. Note that the hollow design of the hollow partition should be full of beauty;
4, the use of hollow partitions should avoid the clutter of display items;
5, such partitions are easy to deposit dust, so pay attention to regular cleaning;
6. The size and height of the hollow partition should be selected according to the room space and actual needs.
Hollow partitions are widely used in our lives. Although they are not used everywhere, this does not mean that the hollow partition is not important. If there is an urgent need to cut off the space, it will be of great use. Therefore, it is necessary to design a hollow partition at home. I hope that the introduction of Xiaobian can help you. If you want to know more about the decoration skills, please continue to pay attention to our decoration home network.
More related wonderful reading:
The installation steps of the porch hollow partition are characterized by the porch hollow partition
Hollow partition function features hollow partition use break considerations
Hollow partition considerations installation of hollow partition
Home Decoration
QINGDAO SANJET NEW POWER MACHINERY CO., LTD. , https://www.sanjet.net