KCB stainless steel gear pump A gear pump, specifically a kind of acid pump, wear-resistant gear pump. According to the design proposal provided by the utility model, the driving shaft and the driven shaft are mounted on the housing, the gear is mounted on a section of the driving shaft located in the housing, the gear engaged with the gear is arranged on the driven shaft to form a pair of gear pairs, The shell is provided with an inlet and an outlet for materials. The utility model is characterized in that a ceramic plate is arranged on the inner wall of the cavity for accommodating the gear pair in the shell. The device by changing the gear pump structure, to improve the gear pump acid and wear resistance. KCB-960 stainless steel gear pump gear, shaft, pump body, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. KCB-960 stainless steel gear pump has a well-designed drainage and oil return groove, the gear in the work to withstand the torque of the smallest, so the bearing load, wear a small, high pump efficiency. KCB-960 stainless steel gear pump with safety valve as overload protection, safety valve full back pressure of the pump rated exclusion pressure of 1.5 times, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. KCB-960 stainless steel gear pump is mainly used for conveying lubricating oil in the lubrication system of various machinery and equipment. It is suitable for conveying viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) and temperature of 300 ℃ The following lubricating oil. KCB-960 stainless steel gear pump can deliver non-lubricating oil, beverage, low corrosive liquid. Equipped with copper gear can deliver low-point liquid, such as gasoline, benzene and so on. In addition to this series of stainless steel gear pump configuration common motor, but also according to user needs with the specifications of the explosion-proof motor configuration.