Furniture purchase points:
Furniture is closely related to people's lives, affecting people's quality of life and physical health. Therefore, it is best to remind the public to make a good knowledge reserve before purchasing furniture, and learn some tips for identifying and identifying various furniture. Here, the Times reporter specially collected 11 purchase tips, hoping to help you.
1. Is the furniture material reasonable?
Different furniture, surface materials are different. For example, the legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while the internal materials can be used with other materials; the thickness of the large wardrobe legs is 2.5cm, too thick and clumsy, thin and easy to bend Deformation; kitchen and bathroom cabinets can not be made of fiberboard, but should be used with plywood, because the fiberboard will expand and damage when exposed to water; the dining table should be washable.
It was found that the wood had insect eyes and foaming, indicating that the drying was not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.
2, the wood moisture content does not exceed 12
The moisture content of furniture should not exceed 12%, the water content is high, and the wood is easy to warp and deform. When the average consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the furniture or the place where there is no paint inside. If you feel the moisture, the moisture content is at least 50%, which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If the sputum is slow or not, the moisture content is high.
3. Is the furniture structure firm?
Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating good quality; if the sound is dumb, there is a murmur, indicating The blink of an eye is not tightly integrated and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on a move, you will twist and sway. If you shake it, it will be a nail, and it will take a long time. Square tables, tables, chairs and other legs should have four triangular clips, which can be used for fixing. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.
4. Is the furniture four feet flat?
This point is flat on the ground and I know that some furniture has only three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be straight and straight, and the door should not sag.
5, veneer furniture is not strict
Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not. Look at the light when you check it, and don't see it when you don't. The ash veneer veneer furniture is relatively damaged, generally only used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. Particleboard veneer furniture, the ground part must be edged, and the edge banding will absorb moisture, swell and damage. Generally, the corners of the veneer furniture are easy to be tilted up. When picking, you can buckle the corners by hand. If you buckle it up, it means there is a problem with the glue.
6. Is the furniture edge flat?
The edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and whether the color of the nails is consistent with other places. Usually the nail hole is sealed with putty. Pay attention to whether the putty is bulging. If it is bulged, it will not work. Slowly, the putty will fall out from the inside.
7, mirror furniture should take a photo
Choose furniture with mirrors, such as dressing table, mirror, and dressing mirror. Take care of it and see if the mirror is deformed. Check if there is lining paper and backboard at the mercury in the back of the mirror. Qualified, no paper, no, otherwise the mercury will be worn away.
8, the paint part should be smooth
The paint part of the furniture should be smooth and flat, not sloppy, wrinkle-free, and flawless. The corners are not straight at right angles, and the straight edges are prone to slag and paint. There should also be a paint inside the door of the furniture, without the paint board being easy to bend and not beautiful.
9. Is the fitting installation reasonable?
For example, check that the door lock switch is not working; the big cabinet should be equipped with three dark hinges, and some can only be installed with two; the upper three silks, some cut corners, only one screw, will be used .
10, sofa, soft bed to sit down
When picking up sofas and soft beds, you should pay attention to the surface to be flat, but not high and low; soft and hard to be even, but not hard, that piece of soft; moderate hardness, neither too hard nor too soft. The method of selection is to sit down and squat with your hand, the flatness is not flat, and the spring does not ring. If the spring laying is unreasonable, causing the spring to bite the spring, it will make a sound. Secondly, it should also pay attention to whether the quilting has broken wires or jumpers, and whether the density of the corner teeth is reasonable.
11, the color should be coordinated with the interior decoration
Although the white furniture is beautiful, it is easy to turn yellow when it is long, and the black is easy to gray. Don't be beautiful at the time. At the end, it is not white, black is not black. In general, furniture that resembles mahogany is not easily discolored.
ZHM type is used for cylinder piston rod of dustproof seals.Wiper ZHM seals has a double lip dustproof ring, not only can prevent dust from oil, widely used for cylinder and cylinder.
Wiper ZHM seals working environment of the product is subjected to temperature and medium depends on the material itself.Different materials have different colors, meeting the needs of customers is our aim.
Wiper ZHM seals
Wiper ZHM Seals,Wiper Seals ZHM,ZHM Seals,Dust Seal ZHM
Shenyang ZhongYe Seals Factory ,