Same layer drainage and traditional down drainage
   Same layer drainage and traditional down drainage:
   The most fundamental difference is that the same layer of drainage does not require the old P- bend and the old-style S- bend water-sealed water bend, while the traditional lower drainage method is that each sanitary appliance must be attached with a P- bend or S- bend water seal. The old P- bend and the old S trap are the most prone to blockages, which is the biggest drawback of the traditional drainage method. Using the habitual thinking to look at the same layer of drainage, this is where people do not understand the same layer of drainage. Welcome to the company's official website http://
   The second difference is that the same horizontal drainage horizontal pipe is laid in the inner casing, while the traditional lower drainage horizontal pipe including its P- bend and S- bend is laid through the floor in the lower layer, occupying the inner space of the lower casing.
   The third difference that comes with it is that once the blockage occurs, the same layer drainage method can achieve the purpose of clearing and unblocking in the cover (uncovering the cover of the multifunctional floor drain or accessor), while the traditional drainage method is Be sure to go to the lower set to clean up.
   The fourth difference is that when the upstairs user uses sanitary ware under the traditional drainage method, obvious noise can be heard downstairs, and almost no sound can be heard in the same floor drainage mode.
Niobium is an excellent additive in the production of microalloyed steels. Adding niobium to steel will result in the formation of niobium carbides and niobium nitrides in the steel structure. These materials can make the steel grain more detailed, slow recrystallization process, and enhance the deposition of steel hardening. The steel thus formed has higher hardness, strength, moldability and weldability. Micro- Alloy stainless steel niobium content of 0.1% or less. High-strength low-alloy steel production needs to be added niobium, this type of steel is used in automotive structural parts. Niobium-containing alloys are also used in transportation pipelines.High Purity Melting Niobium is mainly used to produce high-purity niobium ingots. In general, the niobium content is over 99.9% in the high purity Melting Niobium content, which can be used to produce High Purity Niobium Ingot that the niobium content could exceed 99.99%.
BT Alloy Co.,Ltd. was founded in 2005 with a strong financial foundation, a sound system ofpersonnel and system management. The company is located in 205 Century Road,Dawukou Area, Shizuishan,Ningxia Province, China, and mainly produceand sale related Ta, Nb, Be and Graphite, Al products, semi-finished products. Afteryears of development, the company has two factories, which covers an area ofmore than 40000 square meters, with professional facilities and personnel.
Companiesadhering to the scientific management of modern enterprises, the production ofprecision, forge ahead, pioneering and innovative, rapid rise to the strengthenterprises in the local market. BT Alloy firmly believe that there is nomarket for the enterprise, only have enterprises that cannot find market. Thequality of the product and the company's integrity has been established as theprimary task. Over the years, BT Alloy spent lots of capital on the productdevelopment, and now has a mature technology and ability to provide highquality products for our customers.
High Purity Melting Niobium
High Purity Melting Niobium,High Temperature Niobium,High Purity Niobium,High Temperature Resistance Niobium
SHIZUISHAN BT ALLOY CO.,LTD , http://www.szsbthj.com