Coal pump news] Coal pump is more stable in the pump, the probability of failure is low, but the total failure of the instrument, in order to better maintain the coal slurry pump, coal slurry pump to promote the stable operation and reduce the Failure rate during driving, we must do a good job in coal slurry pump weekly inspection and regular inspection. The following Xiaobian specific to introduce coal slurry pump failure prevention and maintenance. Coal slurry pump failure prevention and maintenance of introduction 1, each time you prepare to drive, test lights and drop test, found that the problem in a timely manner to eliminate the accident in the bud. 2, to develop a reasonable gas diaphragm and shaft seal valve life cycle, regular replacement, try to avoid the possibility of damage during driving and reduce the impact on the system. 3, regularly check the pressure controller, pressure controller does not meet the requirements of replacement, to avoid damage caused by the pressure controller during driving caused by parking. 4, Regularly check the fastening cable wiring and trachea, tubing joints, to avoid poor contact or cable due to leakage, leakage caused by the system parking. 5, regular inspection and commissioning of interlocking devices to confirm the value of interlocking and interlock protection reliability, regular inspection of the coal slurry pump during driving, found the problem promptly handled to avoid the problem to expand. Further reading: Motor IFAT China's top ten brands Guangzhou Exhibition building water pump manufacturers ranking ptc Show article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor : Gogoing (QQ / wechat: 181817456) starting: http://beng.liuti.cn/ (service hotline: 400-6030-811)