After years of reform and opening up, China has undergone tremendous changes in many fields. This is not only the crystallization of the wisdom and work of several generations of workers, but we also have the help of many international friends. Especially in the field of centrifugal pumps, we have created a class of excellent products in absorbing the needs of international advanced technologies and the actual work environment in our country. Magnetic centrifugal pump as the latest and most representative masterpiece, its appearance caused a sensation. Next, we will bring magnetic centrifugal pump structure and structural characteristics of the introduction. Magnetic centrifugal pump structure and structural features 1, magnetic chemical centrifugal pump from the centrifugal pump, magnetic actuator, the motor consists of three parts. The key components of the magnetic actuator consists of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation cover. When the motor drives the outer magnet rotor to rotate, the magnetic field can penetrate the air gap and the non-magnetic substance to drive the inner magnet rotor connected with the impeller to rotate synchronously to realize the powerless contact transmission and transform the dynamic seal into the static seal. 2, Magnetic self-priming centrifugal pump adopts advanced external mixed axial backwater pump body structure design, the pump body consists of suction chamber, liquid storage chamber, volute, backflow hole, gas-liquid separation chamber and other components. After the pump is started, under centrifugal force, the remaining liquid in the water absorption chamber and the air in the liquid inlet pipe are stirred by the impeller to form a gas-liquid mixture, and the mixture enters the gas-liquid separation chamber through the volute. As the flow rate decreases, gas and water Separation, the air from the pump outlet discharge. Magnetic self-priming pump drive device with active magnet coupling mounted directly on the motor shaft, indirectly through the magnetic coupling impeller rotor drive rotation, the pump chamber is fully closed, no leakage. 3, magnetic high-viscosity centrifugal pump is a disc pump, magnetic actuator, motor consists of three parts. Disc impeller centrifugal pumps, the energy transfer from the impeller to the liquid flow is carried out by the friction force of the boundary layer of the rotating disc. As the liquid enters the pump, its molecules interface with the disc surface and form a boundary layer. As the pump rotates, energy transfer to the successor layer of liquid molecules between the discs occurs. A strong pressure field created in this way leaves the product "dragged" out of the pump. According to the transmission medium physical, chemical properties, abrasion, corrosive different overcurrent parts of the material is divided into two categories of metals and non-metallic. Through the above magnetic chemical centrifugal pumps, magnetic self-priming centrifugal pumps, magnetic high-viscosity centrifugal pump structure of three types of magnetic centrifugal pump structure features introduced, we can know why the magnetic centrifugal pump can be used in so many fields too much. I believe that with the market further requirements, magnetic centrifugal pump will continue to sail. This article is copyrighted industry interconnect (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network (CEO QQ / micro letter: 18,189,528) Editor: Coco (QQ / micro-channel: 97,129,096) starting: http : //beng.liuti.cn/ (Service Hotline: 400-6030-811)