Silicone rubber for concrete molds applications Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products . Silicone rubber for concrete molds features Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50A°after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for concrete molds operation instructions Step One: Take100gof part A and add2gof part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold . Shelf life for silicon rubber concrete molds 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for concrete molds 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum For more information , please feel free to contact Ms penny office no. :0086-755-89948294 Mob:86-18823707214 Skype: penny9110 Email :hyxe(at)szrl(dot)net Welcome to our website www dot szrl dot net