The gage shown in Figure 1 is our successful DC250 multi-use measurement block. The column of the column 1 is engraved with a spiral groove, the lower part is a chassis, the diameter of the chassis is 75 mm, and the height of the column 1 is 220 mm. The rotary table 2 can be raised or lowered along the spiral groove of the column 1. The rotary table is divided into two upper and lower working faces I and II, and the design dimensions of the two working faces are 100 js7. The actual size is 100+xmm, and the mark is on the surface of the rotary table. The parallelism error between the I and II working faces of the bottom of the column is below 1μm.
Load Cell For Bench Scale,300Kg Load Cell,Load Cell For Weighing Machine,Metter Toledo Load Cell
Jiangsu Lude Electrical Manufacturing Co.,Ltd , https://www.ludescale.com