Ventilation fan A motor-driven air-conditioning device in which the air is driven by the motor to rotate the air flow to allow indoor and outdoor air exchange. Also known as the ventilation fan. The bathroom is the place with the most serious moisture and turbidity. Therefore, many families will install ventilation fans to not only make the air in the bathroom clean and give off unpleasant odors, but also reduce relative humidity, keep the interior dry, and reduce bacteria. Breeding also has great benefits for human health. So, how to install the bathroom ventilation fan? What are the bathroom ventilation fan brands and what are their maintenance methods? I believe we will have a more in-depth understanding of this article.
First, what kind of bathroom ventilation fan
Wall-mounted exhaust fans are small in size. This type of wall is usually cut into a hole in the wall and can be set above the wall. However, due to the narrow cross-section of the exhaust vent of the bathroom ventilation fan of this type, the ventilation effort is weak. Therefore, it is recommended to install it in a small bathroom.
Window exhaust fan is different from the first two, it has a single, double two-way operation, which can not only discharge indoor air, but also can be added to the indoor fresh air, so the window exhaust fan is relatively large scope of application The effect is better. This is the best bathroom ventilation fan, even if the ventilation is weak, the bathroom space can be drained.
Second, bathroom ventilation fan brand
1. Zhengye GENUIN
Masano Electric is an international investment company invested by Marcelo International Group, which also produces high-end ventilation fans, switches, sockets and other home accessories companies. The Zhengye ventilation fan adopts high-quality flame-retardant material that is formed once by the non-static ABS engineering plastic particles and achieves a very high level of quality from appearance to safety. Self-designed all-copper drive motors generate much less heat than international standards, and built-in thermal protection devices increase safety.
2. Jinling
Jinling is a well-known household appliance company that mainly produces washing machines. Jinling, established in 1979, is at the forefront of ventilation fans in terms of technical strength and brand strength. Jin Ling also has a fairly high reputation in the ventilation fan industry. As the first enterprise that produces exhaust fans in China, it has a special export base for mechanical and electrical products approved by the State Council. With its own strength and experience in cooperation with well-known foreign companies, its series of ventilation fans are sold both at home and abroad. It has become the designated production base of Vent-Axia, the royal ventilation product of the United Kingdom. It has in-depth cooperation with Yufeng to improve product innovation and competitiveness.
Third, bathroom fan how to install - installation method
1. Installation is stable: When the ventilation fan is installed, attention should be paid to the horizontal orientation of the fan, and the fan should be adjusted to the same level as the foundation plane. After the ventilation fan is installed, there can be no skew appearance.
2. When installing the ventilation fan, the adjustment bolts of the motor should be in the position of convenient operation. In order to use, adjust the bathroom ventilation fan belt elasticity.
3. When installing the bathroom ventilation fan bracket, be sure to align the bracket with the ground plane level. If necessary, reinforce the angle iron next to the ventilation fan.
4. After installing the fan, check its surrounding tightness. If there is free space, it can be sealed with a sun plate or glass glue.
Fourth, bathroom fan how to install - installation precautions
1. When selecting the air outlet environment, it should be noted that there should not be too many obstacles within 2.5 -3m opposite the outlet.
2, as close as possible to the original duct outlet, the principle of the shortest pipeline
3, as close as possible to the location of breath moisture, the principle of maximum efficiency
4, should not be installed directly above the shower site, or angry gas production makes the body feel uncomfortable, and heat loss at low temperatures. The bathroom ventilation fan is most effectively installed within three feet of a place where it is necessary (such as a shower position).
5, combined with the ceiling modeling, block, lighting, etc., the same considerations for beauty.
6. It is best to separate the bathroom from the washroom in the living room, which is like a bathroom. It is best to install two bathroom ventilation fans, one in a place close to the shower, and the other in the vicinity of the toilet.
7. Installation is stable: When the bathroom ventilation fan is installed, attention should be paid to the horizontal orientation of the fan, and the level of the fan should be adjusted to be consistent with the plane of the foundation. The ventilation fan cannot be installed with a skewed appearance after installation.
8. When installing the ventilation fan, the conditioning bolts of the motor should be in a convenient operating position. In order to use, adjust the bathroom ventilation fan belt elasticity.
9. When installing the ventilator support for the bathroom, make sure that the bracket is level with the ground plane. If necessary, reinforce the angle iron next to the bathroom ventilation fan.
10. After installing the fan, check its closeness. If there is a depression, it can be sealed with a sun plate or glass glue.
Fifth, bathroom ventilation fan maintenance
Ventilation fan maintenance is an important point that many people will ignore. If the ventilation fan is not detected and cleaned regularly, it will cause poor ventilation or ventilation problems. When the ventilation fan is in operation, the floating particles and dust in the air will be adsorbed. In the ventilation fan, so if you want to maintain the effectiveness of the ventilation fan for a long time, you must always clean up the dust and dirt accumulated in the ventilation fan, and regularly check the line is operating normally, there is no damage, so as to effectively ensure the exhaust gas and fresh air Exchanged in.
VI. Consequences of improper maintenance and installation of bathroom ventilation fan
If the ventilation fan is installed improperly or in poor position or if it is not cleaned for a long period of time after installation, the moisture in the room cannot be completely discharged. This can cause mildew in the bathroom. In the case of dark and damp, it is most likely to grow bacteria. More serious situations will cause black stains on the ceiling or wall paint to fall off. It will cost a lot to repair the wall and ceiling repairs. The bathroom ventilation fan must be installed properly.
Editor's summary: The above is the bathroom ventilation fan how to install bathroom ventilation fan improper installation of the relevant knowledge of the introduction, hoping to help meet the needs of friends! For more information, please continue to pay attention to our website, follow-up will show more exciting content. You can also purchase your favorite product on Qijia Mall!
Toilet fan bathroom how to decorate bathroom floor drain installation bathroom how to ceiling toilet toilet ceiling how to disassemble bathroom ventilation fan how to install
Plywood is the basic wooden product for furniture, is one of the biggest wooden products, is used for plane, boat, train, bus, construction and package etc. It is the one of the main way to save wood resource and improve the usage of wood.Usually poplar, pine, combi, hardwood as the core, the bace&back are the Veneer surface, such as Okoume, Bintangor, Pine, Birch, Poplar, Pencil cedar, Maple, Cherry, White Oak, Sapele, Beech, Red Oak, Ash etc.
LULI Group Corp. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of plywood, venner, MDF , Particle board, Door skin, Blockboard, Finger joint board, OSB , paper, Steel etc. And we have High Quality Plywood.
Advantages:
1.High bending strength
2.Strong nail holding
3.Moisture-proof and easy work
4.Tight construction and high strength
5.No ratten or decay
6.Low formaldehyde emission
7.The productions are suitable for the construction of viaduct and tall frame building
8.If put in boiling water for 48 hours,it still glue sticking and still formed
9.If used abide by illustration strictly,it can be reuse more than 50 times
10.Solve the problem of leaking and rough surface during construction process.Particular suiltable for watering concreat.
The details of Plywood:
size:1220*2440mm 1220*3000mm 915*1830mm 1250*2500mm, according requirement
thickness:2mm-60mm
core:poplar/combine/hardwood
glue:MR/E2/E1/E0/melamine/WBP
kinds:okoume,bintangor,pine,birch,poplar,cedar,ect.
certification:CARB,FSC,CE,JAS,ISO9001,ISO14001
Plywood
Commercial Plywood,Plywood Sheet,18mm Plywood,Plywood Prices
Luli Group Co.,Ltd. , https://www.cnluli.com