Intelligent classification trash can adopts advanced microcomputer control chip, infrared sensor detection device, and mechanical transmission components. It is a high-tech new product that integrates machine and photoelectricity. When a person's hand or object approaches the feeding port (should sense the window), it is about 25cm. - 35cm, the trash lid will automatically open, wait 3-4 seconds after the garbage input will automatically shut down, people, things do not need to contact the trash, a thorough solution to the traditional trash can exist on the user's health infections Hidden dangers can effectively prevent all kinds of infectious diseases from spreading through the garbage and prevent the smell of garbage in the barrel from overflowing.
Intelligent classification trash function
Qualified intelligent trash can features stable performance, long service life (6-10 years design life), easy use, precise operation, precise design, environmental protection, energy saving and low consumption (power consumption is 1/3 of similar products in the market). .
Intelligent trash can, using microcomputer control chip, first infrared detection device, mechanical transmission device and connecting rod mechanism, automatic switch cover, is a high-tech new product integrating the machine, light, and electricity in one, with reliable performance and long service life. Low power consumption. Intelligent trash can, people do not need to touch any part of the trash can be put on garbage, prevent cross-infection, environmental health, elegant appearance; no external power supply, use ordinary batteries, low power consumption, long life; good sealing performance, reducing life The probability of cross-infection of various pathogens, no garbage odor overflow, to ensure fresh air around.
Intelligent classification trash can use instructions
Product instructions
1. Open the battery cover on the head of the trash can and insert the No. 5 battery (AA) into the four sections according to the positive and negative signs.
2. Turn on the power switch at the back of the barrel. The red indicator light is on (about 3 seconds). After that, the indicator blinks every 3 seconds, indicating that the circuit system has entered the working state.
3. When putting garbage, place the hand or object close to the sensing window (vertical direction) 25-35cm above, about 0.5 seconds later, the lid will open automatically. After the waste is put into 3-4 seconds, the lid will close again. If the hand or object does not leave the sensing area, the lid will remain open.
4. After the garbage in the barrel is full, the entire lid of the barrel can be removed, and the plastic bag inside or the inner barrel can be taken out to dump the garbage.
5. The indicator light flashes red (every 3 seconds) when it waits for a normal state. The indicator light is steady red when the cover is opened, and the indicator goes to standby after closing the cover.
6. When the trash can needs to be normally open, normally closed, or manual, you can turn off the power switch. When the trash can not be used for a long time, you should turn off the power switch to remove the battery, so as to avoid battery leakage and damage the circuit.
7. In the automatic working state, it is strictly forbidden to push the lid manually or externally; the inside of the lid has precision circuit, and shall not be disassembled without authorization so as to avoid damage to the circuit or structure; when cleaning the lid, no direct flushing with water is allowed, only the wet cloth may be used. Wipe so as not to damage the circuit.
8. When the battery runs out, there will be slow opening or no opening. Please take it out and replace it. If you press and open it 20 times per day, the battery can be used for about 12 months.
Cleaning runs throughout the semiconductor manufacturing. The cleaning of semiconductors runs through the entire semiconductor process. From the silicon wafer manufacturing, it is necessary to clean the polished silicon wafer to remove surface contaminants, remove photoresist, wet etching, CVD, etc. in the chip preparation, and then to the final material quality inspection. Every step needs to be cleaned to ensure that the next step is free from impurities and maintain the yield of the product. At the same time, as the chip process continues to shrink, the number of cleanings required is increasing. According to statistics, the number of cleaning processes accounts for one-third of the entire chip manufacturing process, and is an important part of chip manufacturing. Very low surface tension and viscosity, it can be well dispersed and spread into various gaps, with good scouring and wetting cleaning effect.
Chemical Cleaning Solutions,Hydrofluoroether Boiling Point Detergent,Hfe Poisonless Harmless Cleaning Solution,Cleaning Solution For Semiconductor
Guangdong Giant Fluorine Energy Saving Technology Co.,Ltd , https://www.tuwtech.com