Thermal insulation bridge aluminum alloy doors and windows widely used

【China Aluminum Industry Network】Improving the thermal insulation performance of building envelopes, especially improving the thermal insulation performance of doors and windows, can effectively reduce the heat loss of buildings and contribute to building energy conservation. Therefore, the development of energy-saving doors and windows is greatly conducive to the future development of the construction industry, and is conducive to the effective use of energy, reduce energy consumption, it is worth promoting.

The aluminum alloy aluminum alloy doors and windows of the thermal break bridge, the aluminum alloy profiles are divided into two parts inside and outside through the reinforcement of the nylon heat insulation strip, and the heat conduction of the aluminum is blocked. The advantage of this kind of door and window is that it can be used continuously, and has the characteristics of good rigidity, high strength and hardness, good fire resistance, high thermal insulation performance, large lighting area, strong corrosion resistance, long service life, and good decorative effect. . In cold weather in winter, broken aluminum windows and doors with thermal insulation strips can reduce at least 1/3 of the heat lost through the door and window frames; and in the heat of the summer, the window frames with thermal insulation strips can be larger. The degree of blockage of hot air from the outside, if there is air conditioning, it will relatively reduce the loss of air conditioning energy, but also reduce the environmental radiation generated by air conditioning and heating, to achieve a true energy saving and environmental protection.

Because of this, the aluminum alloy doors and windows of the thermal break bridge are deeply loved by users, and are widely used in many energy-saving doors and windows.

Plywood is the basic wooden product for furniture, is one of the biggest wooden products, is used for plane, boat, train, bus, construction and package etc. It is the one of the main way to save wood resource and improve the usage of wood.Usually poplar, pine, combi, hardwood as the core, the bace&back are the Veneer surface, such as Okoume, Bintangor, Pine, Birch, Poplar, Pencil cedar, Maple, Cherry, White Oak, Sapele, Beech, Red Oak, Ash etc.

LULI Group Corp. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of plywood, venner, MDF , Particle board, Door skin, Blockboard, Finger joint board, OSB , paper, Steel etc. And we have High Quality Plywood.

Advantages:

1.High bending strength

2.Strong nail holding

3.Moisture-proof and easy work

4.Tight construction and high strength

5.No ratten or decay

6.Low formaldehyde emission

7.The productions are suitable for the construction of viaduct and tall frame building

8.If put in boiling water for 48 hours,it still glue sticking and still formed

9.If used abide by illustration strictly,it can be reuse more than 50 times

10.Solve the problem of leaking and rough surface during construction process.Particular suiltable for watering concreat.

The details of Plywood:

size:1220*2440mm 1220*3000mm 915*1830mm 1250*2500mm, according requirement

thickness:2mm-60mm

core:poplar/combine/hardwood

glue:MR/E2/E1/E0/melamine/WBP

kinds:okoume,bintangor,pine,birch,poplar,cedar,ect.

certification:CARB,FSC,CE,JAS,ISO9001,ISO14001

plywood

Plywood

Commercial Plywood,Plywood Sheet,18mm Plywood,Plywood Prices

Luli Group Co.,Ltd. , https://www.cnluli.com

This entry was posted in on