First, the daily maintenance of PVC plastic windows:
In order to give full play to the advantages of plastic-steel windows and extend the service life of plastic-steel windows, attention should also be paid to the maintenance and maintenance of plastic-steel windows during use:
1. The dust on the doors and windows should be cleaned regularly to keep the doors, windows, glass and hardware clean and bright.
2. If the door and window are contaminated with oil stains and other difficult to clean things, you can use Jieerliang to scrub, but it is best not to use strong acid or strong alkali solution for cleaning, which not only makes the surface finish of the profile damaged, but also destroys the surface of the hardware. The protective film and the oxide layer cause corrosion of the hardware, especially when some customers use the sulfuric acid to clean the wall surface, be careful not to let the doors and windows be infected.
3. The debris inside the frame should be cleaned in time to prevent the drainage channel from being blocked and causing poor drainage and water leakage.
4. When opening the doors and windows, the strength should be moderate, try to keep the speed even when opening and closing.
5, try to avoid hitting the door and window with a hard object or scratching the surface of the profile.
6. When it is found that the door and window are inflexible or other abnormal conditions during use, the reason should be found in time. If the customer cannot eliminate the fault, contact the door and window manufacturer and supplier so that the fault can be eliminated in time.
Second, the precautions when using:
1. When the door and window are installed, the surface protective film of the profile should be peeled off and scrubbed clean; otherwise, the adhesive of the protective film will remain on the profile, clay, sticky ash, extremely unattractive, and difficult to be cleaned again. clean.
2. When the wind is blowing, the casement window sash should be closed in time.
3. Heavy objects cannot be hung on the door and window hardware.
4, swinging the lower hanging window is to change the handle opening direction to achieve different opening, to understand how to operate, so as not to cause damage.
5. When sliding doors and windows are used, the push-pull track should be cleaned frequently to keep it clean so that there are no hard particles in the track surface and the groove.
6. Plastic door and window products are provided with drainage and decompression systems in the window frame and window sash to ensure the airtightness and watertight performance of the doors and windows. When using the user, do not block the drainage holes and air pressure balance holes of the doors and windows. In order to avoid the drainage performance of doors and windows, the rain in the snow and rain will cause infiltration, which will bring inconvenience to daily life and work.
7. When pushing and pulling the sliding window, the force point should be in the middle or lower position of the window sash. The push-pull effect is better. Do not use excessive force when pushing and pulling, so as not to reduce the service life of the window sash.
8. When the yarn fan is cleaned, the user should not remove the rubber strip of the fixed gauze and take down the gauze. Instead, remove the gauze as a whole and scrub with a water-soluble detergent and a soft cloth.
9. When the winter gauze fan is not in use, the user can remove the screen window and store it as needed. The yarn fan should be stored at a distance of 1 meter away from the heat source. The flat or short side should be placed vertically. No hard object pressure can be used to avoid deformation.
10. When using the screen fan of the sliding window, please pay attention to the vertical frame of the inner sliding fan to maintain good sealing.
In the case of changes in the market situation, small and medium-sized door and window enterprises want to gain a foothold in the impact, not only enterprises must start their own brand, door and window dealers must also fully support brand marketing and win a good reputation. The so-called good word of mouth brings repeat customers, good reputation is the best way for door and window enterprises and distributors to stand on the local door and window market.
Sodium Formate,Sodium Formate Formula,Sodium Formate Deicer,Sodium Formate Ka
Chemicals ,Fertilizer Co., Lt d , http://www.nbfertilizer.com