High-pressure angle control valve introduction

High pressure control valve is a special valve for high static pressure and high pressure differential adjustment, mostly single-seat angle, the maximum nominal pressure up to 32.0MPa. Angle high-pressure regulating valve body is forged structure. The nominal size of the male threaded control valve is DN3 ~ 25mm. The valve stuffing box and the valve body made of one, packing with the stem nut compression, seat and valve body separately, with the valve base pressed into the valve body. This structure is easy to process, easy to replace the valve seat, spool for the single-oriented structure, only the formal dress. Because of unbalanced force, generally with the valve positioner. Flanged control valve nominal size of DN15 ~ DN80mm. The valve packing box and the valve cover made of one, with the stent compression; valve seat and the body separate, generally threaded into the valve body; spool for the single-oriented structure, only the formal dress; stem nut and thread connection , The connection at a set screw; flange and body threaded connection, easy to install.